TLV990-40中文资料10 位 40MSPS 单通道 AFE，用于 CCD 传感器数据手册TI规格书

描述 Description

The TLV990-40 is a complete CCD and video signal processor/digitizer designed for digital still camera and video camcorder applications. The TLV990-40 performs all the analog-processing functions necessary to maximize the dynamic range, corrects various errors associated with the CCD sensor, and then digitizes the results with an on-chip high-speed analog-to-digital converter (ADC).
The key components of the TLV990-40 include: an input clamp circuit for CCD and analog video signals, a correlated double sampler (CDS), a programmable-gain amplifier (PGA) with 0 to 36-dB gain range, two internal digital-to-analog converters (DAC) for automatic or programmable optical black level and offset calibration, a 10-bit, 40-MSPS pipeline ADC, a parallel data port for easy microprocessor interface, a serial port for configuring internal control registers, two additional DACs for external system control, and internal reference voltages.
Designed in advanced CMOS process, the TLV990-40 operates from a single 3-V power supply with a normal power consumption of 200 mW at 40 MSPS, and 2 mW in power-down mode.
Its very high throughput rate, single 3-V operation, very low-power consumption, and fully-integrated analog processing circuitry make the TLV990-40 an ideal CCD and video signal-processing solution for electronic video-camcorder applications.
This device is available in a 48-pin TQFP package and is specified over a –20°C to 75°C operating-temperature range.

特性 Features

·Single-Chip CCD Analog Front-End ·10-Bit, 40-MSPS, A/D-Converter Single 3-V Supply Operation ·Very Low Power: 200 mW Typical, 2-mW Power-Down Mode ·Differential Nonlinearity Error: ·Integral Nonlinearity Error: ·Programmable Gain Amplifier (PGA) With 0-dB to 36-dB Gain Range (0.045 dB/Step) ·Automatic or Programmable Optical Black Level and Offset Calibration With Digital Filter and Bad Pixel Limits ·Additional DACs for External Analog Setting ·Serial Interface for Register Configuration ·Internal-Reference Voltages ·48-Pin TQFP Package ·Application ·Digital Still Camera ·Video Camcorder
The test register must be set to 1011 for 40 MSPS operation.