TLV840NADL35DBVR集成电路（IC）的监控器规格书PDF中文资料

TLV840NADL35DBVR属于集成电路（IC）的监控器。由德州仪器制造生产的TLV840NADL35DBVR监控器PMIC 监控器用于监视和/或控制电路中的电压轨，能够连接微控制器以维持一定的功率限值。监控器类型包括电池备用电路、监控器、多电压监控器、电源监控器、稳压器/监控器、复位计时器、定序器、简单复位/上电复位、智能开/关控制器、系统管理器、电压检测器和看门狗电路。

1 Features

• Operating voltage range : 0.7 V to 6 V

• Nano supply current : 120 nA (Typical)

• Fixed threshold voltage (VIT-): 0.8 V to 5.4 V

– Threshold voltages available in 100mV steps

– High accuracy: ±0.5% (Typical)

– Built-in hysteresis (VHYS): 5% (Typical)

• Reset time delay (tD): capacitor-based

programmable (TLV840C, TLV840M)

– Minimum time delay: 40 μs (typical) without

capacitor

• Active-low manual reset (MR) (TLV840M)

• Four output topologies:

– TLV840xxDL: open-drain, active-low (RESET)

– TLV840xxPL: push-pull, active-low (RESET)

– TLV840xxDH: open-drain, active-high (RESET)

– TLV840xxPH: push-pull, active-high (RESET)

• Wide temperature range: –40°C to +125°C

• Package: SOT23-5 (DBV)

2 Applications

• Motor Drives

• Factory Automation and Control

• Home Theater and Entertainment

• Electronic Point of Sale

• Grid Infrastructure

• Data Center and Enterprise Computing

• Multifunction Printer

3 Description

The TLV840 family of voltage supervisors or reset ICs

can operate at high voltage levels while maintaining

very low quiescent current across the whole VDD and

temperature range. TLV840 offers best combination of

low power consumption, high accuracy and low

propagation delay (tp_HL= 30 μs typical).

Reset output signal is asserted when the voltage at

VDD drops below the negative voltage threshold

(VIT-). Reset signal is cleared when VDD rise above

VIT- plus hysteresis (VHYS) and the reset time delay

(tD) expires. Reset time delay can be programmed by

connecting a capacitor between the CT pin and

ground for TLV840C and TLV840M. For a minimum

reset delay time the CT pin can be left floating.

TLV840N does not offer a programmable delay and

offers fixed reset delay timing options: 40 μs, 2 ms, 10

ms, 30 ms, 50 ms, 80 ms, 100 ms, 150 ms, 200 ms.

Additional features: Low power-on reset voltage

(VPOR), built-in glitch immunity protection for VDD,

built-in hysteresis, low open-drain output leakage

current (Ilkg(OD)). TLV840 is a perfect voltage

monitoring solution for industrial applications and

battery-powered / low-power applications.