TLV809EA17DBZR中文资料德州仪器数据手册PDF规格书

1 Features

• Ensured RESET/RESET for VDD = 0.7 V to 6 V

• Fixed time delay: 40 μs, 10 ms, 50 ms, 100 ms,

200 ms, 400 ms

• Supply current (IDD): 250 nA (typical)

– 1 μA (maximum for VDD = 3.3 V)

• Output topology:

– TLV809E: push-pull, active-low

– TLV803E: open-drain, active-low

– TLV810E: push-pull, active-high

• Under voltage detection:

– High accuracy: ±0.5% (typical)

– (VIT–): 1.7 V, 1.8 V, 1.9 V, 2.25V, 2.4 V, 2.64 V,

2.93 V, 3.08 V, 3.3V, 4.2V, 4.38 V, 4.55V, 4.63 V

• Package:

– SOT23-3 (DBZ) (with pin 1 = GND)

– SOT23-3 (DBZ) (with pin 1 = RESET/RESET)

– SOT23-3 (DBZ) (with pin 3 = GND)

– SC-70 (DCK)

– X2SON-5 (DPW)

• Temperature range: –40°C to +125°C

• Pin-to-pin compatible with MAX803/809/810,

APX803/809/810

2 Applications

• Electricity meters

• Factory Automation

• Portable, battery-powered equipment

• Set-top boxes and TVs

• Building automation

• Notebook/desktop computers, servers

3 Description

The TLV803E, TLV809E, and TLV810E are enhanced

alternatives to the TLV803, TLV853, TLV809, LM809,

TPS3809 and TLV810. TLV80xE and TLV81xE offer

low quiescent current IQ, higher accuracy, wider

temperature range, and lower power-on-reset (VPOR)

for increased system reliability.

The TLV80xE and TLV81xE family are low IQ (250 nA

typical, 1 μA max), voltage supervisory circuits (reset

IC) that monitor VDD voltage level. These devices

initiate a reset signal whenever supply voltage VDD

drops below the factory programmed falling threshold

voltage, VIT–. The reset output remains low for a fixed

reset time delay tD after the VDD voltage rises above

the rising voltage threshold (VIT+) which is equivalent

to the falling threshold voltage (VIT-) plus hysteresis

(VHYS).

These devices have integrated glitch immunity to

ignore fast transients on the VDD pin. The low

IQ and high accuracy (±0.5% typical) makes these

voltage supervisors ideal for use in low-power and

portable applications. The TLV80xE and TLV81xE

devices are specified to have the defined output logic

state for supply voltages down to VPOR = 0.7 V.

The TLV80xE and TLV81xE devices are available

in industry standard 3-pin SOT23 (DBZ) and SC70

(DCK) packages and very compact X2SON (DPW)

package.