1 Features

1• Input Voltage Range: 1.45 V to 5.5 V

• Low IQ: 25 μA (Typical)

• Low Dropout:

– 238 mV (Maximum) at 500 mA (3.3 VOUT)

• Output Accuracy: 1 (Maximum at 85°C)

• Built-In Soft-Start With Monotonic VOUT Rise

• Foldback Current Limit

• Active Output Discharge

• High PSRR: 46 dB at 100 kHz

• Stable With a 1-μF Ceramic Output Capacitor

• Packages:

– 2.9-mm × 1.6-mm SOT-23-5

– 1-mm x 1-mm X2SON-4

– 2 mm × 2 mm WSON-6

2 Applications

• Set-Top Boxes, TV, and Gaming Consoles

• Portable and Battery-Powered Equipment

• Desktop, Notebooks, and Ultrabooks

• Tablets and Remote Controls

• White Goods and Appliances

• Grid Infrastructure and Protection Relays

• Camera Modules and Image Sensors

3 Description

The TLV755P is an ultra-small, low quiescent current,

low-dropout regulator (LDO) that sources 500 mA

with good line and load transient performance. The

TLV755P is optimized for a wide variety of

applications by supporting an input voltage range

from 1.45 V to 5.5 V. To minimize cost and solution

size, the device is offered in fixed output voltages

ranging from 0.6 V to 5 V to support the lower core

voltages of modern microcontrollers (MCUs).

Additionally, the TLV755P has a low IQ with enable

functionality to minimize standby power. This device

features an internal soft-start to lower inrush current,

thus providing a controlled voltage to the load and

minimizing the input voltage drop during start up.

When shutdown, the device actively pulls down the

output to quickly discharge the outputs and ensure a

known start-up state.

The TLV755P is stable with small ceramic output

capacitors allowing for a small overall solution size. A

precision band-gap and error amplifier provides a

typical accuracy of 1. All device versions have

integrated thermal shutdown, current limit, and

undervoltage lockout (UVLO). The TLV755P has an

internal foldback current limit that helps reduce the

thermal dissipation during short-circuit events.

TLV75530PDRVR属于集成电路（IC） > 线性 + 开关稳压器。美国德州仪器公司制造生产的TLV75530PDRVR稳压器 - 线性线性稳压器用于提供稳定的输出电压，无论负载电流、输入电压或环境因素如何变化，这些输出电压通常都要保持不变。它们的工作原理要求输入电压维持在高于所需的输出电压，而且要超出某个最小量，并且在工作时会将输入端的任何多余电压转换为热量。对于大多数应用而言，虽然这种稳压器的效率低于开关模式的稳压器，但它们通常更适合对噪声高度敏感的应用。