TLV5627CD集成电路（IC）的数模转换器（DAC）规格书PDF中文资料

TLV5627CD属于集成电路（IC）的数模转换器（DAC）。由德州仪器制造生产的TLV5627CD数模转换器（DAC）数模转换器（DAC、D/A、D2A 或 D 转 A）可将数字信号转换为缓冲或无缓冲的模拟电压或电流。DAC 架构是否适合特定应用，要取决于分辨率和采样频率。DAC 通常用于音乐播放器，将数字数据流转换为模拟音频流。它们还用于电视和手机，将数字视频数据转换为模拟视频信号，再连接到屏幕驱动器，以显示单色或彩色图像。

Four 8-Bit D/A Converters

Programmable Settling Time

of 2.5 μs or 8.5 μs Typ

TMS320, (Q)SPI, and Microwire

Compatible Serial Interface

Low Power Consumption:

7 mW, Slow Mode − 5-V Supply

3 mW, Slow Mode − 3-V Supply

Reference Input Buffers

Monotonic Over Temperature

Dual 2.7-V to 5.5-V Supply (Separate Digital

and Analog Supplies)

Hardware Power Down

Software Power Down

Simultaneous Update

applications

Battery Powered Test Instruments

Digital Offset and Gain Adjustment

Industrial Process Controls

Machine and Motion Control Devices

Arbitrary Waveform Generation

description

The TLV5627 is a four channel, 8-bit voltage

output digital-to-analog converter (DAC) with a

flexible 4-wire serial interface. The 4-wire serial

interface allows glueless interface to TMS320,

SPI, QSPI, and Microwire serial ports. The

TLV5627 is programmed with a 16-bit serial word

comprised of a DAC address, individual DAC

control bits, and an 8-bit DAC value.

The device has provision for two supplies: one

digital supply for the serial interface (via pins

DVDD and DGND), and one for the DACs,

reference buffers and output buffers (via pins AVDD and AGND). Each supply is independent of the other, and

can be any value between 2.7 V and 5.5 V. The dual supplies allow a typical application where the DAC will be

controlled via a microprocessor operating on a 3-V supply (also used on pins DVDD and DGND), with the DACs

operating on a 5-V supply. The digital and analog supplies can be tied together.

The resistor string output voltage is buffered by an x2 gain rail-to-rail output buffer. The buffer features a

Class AB output stage to improve stability and reduce settling time. A rail-to-rail output stage and a power-down

mode make it ideal for single voltage, battery based applications. The settling time of the DAC is programmable

to allow the designer to optimize speed versus power dissipation. The settling time is chosen by the control bits

within the 16-bit serial input string. A high-impedance buffer is integrated on the REFINAB and REFINCD

terminals to reduce the need for a low source impedance drive to the terminal. REFINAB and REFINCD allow

DACs A and B to have a different reference voltage than DACs C and D.

The device, implemented with a CMOS process, is available in 16-terminal SOIC and TSSOP packages. The

TLV5627C is characterized for operation from 0°C to 70°C. The TLV5627I is characterized for operation from

−40°C to 85°C.