TLV365-Q1 Automotive, 50-MHz, Zero-Crossover, Low-Distortion, High-CMRR, RRI/O, Single-Supply Operational Amplifier

1 Features • AEC-Q100 qualified – Temperature grade 1: –40°C to +125°C • Gain bandwidth: 50 MHz • Zerø-crossover distortion topology: – CMRR: 115 dB (typical) – Rail-to-rail input and output • Input 100 mV beyond supply rail • Noise: 4.5 nV/√Hz • Slew rate: 27 V/μs • Fast settling: 0.2 μ

文件：2.29671 Mbytes 页数：32 Pages

TI

德州仪器

TLVx365 50-MHz, Zerø-Crossover, High-CMRR, RRIO Operational Amplifiers

1 Features • Gain bandwidth: 50 MHz • Zerø-crossover distortion topology: – CMRR: 115 dB (typical) – Rail-to-rail input and output • Input 100 mV beyond supply rail • Noise: 4.5 nV/√Hz • Slew rate: 27 V/μs • Fast settling: 0.2 μs to 0.01 • Precision: – Offset drift: 2 μV/°C (maximum) –

文件：2.30282 Mbytes 页数：34 Pages

TI

德州仪器

TLVx365 50-MHz, Zerø-Crossover, High-CMRR, RRIO Operational Amplifiers

1 Features • Gain bandwidth: 50 MHz • Zerø-crossover distortion topology: – CMRR: 115 dB (typical) – Rail-to-rail input and output • Input 100 mV beyond supply rail • Noise: 4.5 nV/√Hz • Slew rate: 27 V/μs • Fast settling: 0.2 μs to 0.01 • Precision: – Offset drift: 2 μV/°C (maximum) –

文件：2.056679 Mbytes 页数：31 Pages

TI

德州仪器

TLV365-Q1 Automotive, 50-MHz, Zero-Crossover, Low-Distortion, High-CMRR, RRI/O, Single-Supply Operational Amplifier

1 Features • AEC-Q100 qualified – Temperature grade 1: –40°C to +125°C • Gain bandwidth: 50 MHz • Zerø-crossover distortion topology: – CMRR: 115 dB (typical) – Rail-to-rail input and output • Input 100 mV beyond supply rail • Noise: 4.5 nV/√Hz • Slew rate: 27 V/μs • Fast settling: 0.2 μ

文件：2.11069 Mbytes 页数：31 Pages

TI

德州仪器

TLVx365 50MHz, Zero-Crossover, High-CMRR, RRIO Operational Amplifiers

1 Features • Gain bandwidth: 50MHz • Zero-crossover distortion topology: – CMRR: 115dB (typical) – Rail-to-rail input and output • Input 100mV beyond supply rail • Noise: 4.5nV/√Hz • Slew rate: 27V/μs • Fast settling: 0.2μs to 0.01% • Precision: – Offset drift: 2μV/°C (maximum) – In

文件：2.20501 Mbytes 页数：35 Pages

TI

德州仪器

TLVx365-Q1 Automotive, 50MHz, Zero-Crossover, Low-Distortion, High-CMRR, RRI/O, Single-Supply Operational Amplifiers

1 Features • AEC-Q100 qualified – Temperature grade 1: –40°C to +125°C • Gain bandwidth: 50MHz • Zero-crossover distortion topology: – CMRR: 115dB (typical) – Rail-to-rail input and output • Input 100mV beyond supply rail • Noise: 4.5nV/√Hz • Slew rate: 27V/μs • Fast settling: 0.2μs to 0

文件：2.34154 Mbytes 页数：35 Pages

TI

德州仪器

TLVx365-Q1 Automotive, 50MHz, Zero-Crossover, Low-Distortion, High-CMRR, RRI/O, Single-Supply Operational Amplifiers

1 Features • AEC-Q100 qualified – Temperature grade 1: –40°C to +125°C • Gain bandwidth: 50MHz • Zero-crossover distortion topology: – CMRR: 115dB (typical) – Rail-to-rail input and output • Input 100mV beyond supply rail • Noise: 4.5nV/√Hz • Slew rate: 27V/μs • Fast settling: 0.2μs to 0

文件：2.41794 Mbytes 页数：38 Pages

TI

德州仪器

OPA810-Q1 Automotive, 140MHz, Rail-to-Rail Input/Output, FET-Input Operational Amplifier

1 Features • AEC-Q100 qualified for automotive applications: – Temperature: –40°C to +125°C, TA • Gain-bandwidth product: 70MHz • Small-signal bandwidth: 140MHz • Slew rate: 200V/μs • Wide supply range: 4.75V to 27V • Low noise: – Input voltage noise: 6.3nV/√Hz (f = 500kHz) – Input curren

文件：2.31199 Mbytes 页数：40 Pages

TI

德州仪器

具有轨到轨输入和输出的汽车类 50MHz 单电源运算放大器

TLV365-Q1 和 TLV2365-Q1 器件 ( TLVx365-Q1) 是零交叉、轨到轨输入和输出 CMOS 运算放大器系列，针对低电压和成本敏感型应用进行了优化。得益于低噪声 (4.5nV/√Hz) 和高速运行（50MHz 增益带宽）特性，此类器件成为在低侧电流检测、音频、信号调节和传感器放大等应用中驱动采样模数转换器 (ADC) 的理想之选。\n\n特殊功能包括出色的共模抑制比 (CMRR)、无输入级交叉失真、高输入阻抗和轨到轨输入和输出摆幅。输入共模范围同时包括正负电源。输出电压摆幅在电源轨的 10mV 以内。\n\n TLVx365-Q1 的额定工作温度范围为 −40°C 至 • 符合 AEC-Q100 标准 \n• 增益带宽：50MHz\n• CMRR：115dB（典型值）\n• 输入超出电源轨 100mV\n• 噪声：4.5nV/√Hz\n• 快速稳定：0.2µs 至 0.01%\n• 温漂2µV/°C（最大值）\n• 工作电压：2.2V 至 5.5V;

TI

德州仪器

TLV365-Q1 Automotive, 50-MHz, Zero-Crossover, Low-Distortion, High-CMRR, RRI/O, Single-Supply Operational Amplifier

1 Features • AEC-Q100 qualified – Temperature grade 1: –40°C to +125°C • Gain bandwidth: 50 MHz • Zerø-crossover distortion topology: – CMRR: 115 dB (typical) – Rail-to-rail input and output • Input 100 mV beyond supply rail • Noise: 4.5 nV/√Hz • Slew rate: 27 V/μs • Fast settling: 0.2 μ

文件：2.11069 Mbytes 页数：31 Pages

TI

德州仪器