TLV320AIC1110_V01中文资料德州仪器数据手册PDF规格书

FEATURES

2.7-V to 3.3-V Operation

Designed for Analog and Digital Wireless

Handsets and Telecommunications

Applications

Two Differential Microphone Inputs

Differential Earphone Outputs and One

Single-Ended Earphone Output

Earphone and Microphone Mute

Programmable Transmit, Receive, and

Sidetone Paths With Extended Gain and

Attenuation Ranges

Programmable for 15-Bit Linear Data or 8-Bit

Companded (μ-law and A-law) Mode

Supports PCM Clock Rates of 128 kHz and

2.048 MHz

Pulse Density Modulated (PDM) Buzzer

Output

On-Chip I2C Bus, Which Provides Simple,

Standard, Two-Wire Serial Interface With

Digital ICs

Dual-Tone Multifrequency (DTMF) and

Single-Tone Generator Capable of up to 8-kHz

Tone With Three Selectable Resolutions of

7.8125 Hz, 15.625 Hz, and 31.25 Hz

2-Channel Auxiliary Multiplexer (MUX) (Analog

Switch)

Capable of Driving 32 Ω Down to a 8-Ω

Speaker

Programmable Power Down Modes

Pin Compatible to the TLV320AIC1103 and

TLV320AIC1109 Devices for TQFP Only

Available in a 32-Pin Thin Quad Flatpack

(TQFP) Package and MicroStar Junior BGA

APPLICATIONS

Digital Handset

Digital Headset

Cordless Phones

Digital PABX

Digital Voice Recording

DESCRIPTION

The TLV320AIC1110 provides extended gain and

attenuation flexibility for transmit, receive, and sidetone

paths. A differential earphone output is capable of

driving speaker loads as low as 8 Ω for use in speaker

phone applications. The single tone function on the

TLV320AIC1110 generates a single tone output of up to

8 kHz. The resolution of the DTMF tone is also

selectable to 7.8125 Hz, 15.625 Hz, or 31.25 Hz through

the interface control. The analog switch provides more

control capabilities for voice-band audio processor

(PCM codec).