TLV2543CDB集成电路（IC）的模数转换器（ADC）规格书PDF中文资料

TLV2543CDB属于集成电路（IC）的模数转换器（ADC）。由美国德州仪器公司制造生产的TLV2543CDB模数转换器（ADC）模数转换器（ADC、A/D 或 A 转 D）对模拟信号进行采样，例如由麦克风采集的声音或传感器的输出，然后将其转换为数字信号。一般来说，数字输出是二进制补码二进制数，与输入成比例。输入类型可能是差分、伪差分或单端输入。模数转换器可按照位数、采样率、输入数、接口、转换器数和架构（例如自适应增量、双斜率、折叠、流水线、SAR、三角积分、两步式）进行选择。

12-Bit-Resolution A/D Converter

10-ms Conversion Time Over Operating

Temperature Range

11 Analog Input Channels

3 Built-In Self-Test Modes

Inherent Sample and Hold Function

Linearity Error . . . ±1 LSB Max

On-Chip System Clock

End-of-Conversion (EOC) Output

Unipolar or Bipolar Output Operation

(Signed Binary With Respect to Half of the

Applied Referenced Voltage)

Programmable MSB or LSB First

Programmable Power Down

Programmable Output Data Length

CMOS Technology

description

The TLV2543C and TLV2543I are 12-bit, switched-capacitor, successive-approximation, analog-to-digital

converters (ADCs). Each device has three control inputs [chip select (CS), the input-output clock (I/O CLOCK),

and the address input (DATA INPUT)] and is designed for communication with the serial port of a host processor

or peripheral through a serial 3-state output. The device allows high-speed data transfers from the host.

In addition to the high-speed converter and versatile control capability, the device has an on-chip 14-channel

multiplexer that can select any one of 11 inputs or any one of three internal self-test voltages. The

sample-and-hold function is automatic. At the end of conversion, the end-of-conversion (EOC) output goes high

to indicate that conversion is complete. The converter incorporated in the device features differential

high-impedance reference inputs that facilitate ratiometric conversion, scaling, and isolation of analog circuitry

from logic and supply noise. A switched-capacitor design allows low-error conversion over the full operating

temperature range.

The TLV2543 is available in the DW, DB, and N packages. The TLV2543C is characterized for operation from

0°C to 70°C, and the TLV2543I is characterized for operation from –40°C to 85°C.