TLV2354MJB.A中文资料德州仪器数据手册PDF规格书

Wide Range of Supply Voltages

2 V to 8 V

Fully Characterized at 3 V and 5 V

Very-Low Supply-Current Drain

240 mA Typ at 3 V

Common-Mode Input Voltage Range

Includes Ground

High Input Impedance . . . 1012 W Typ

Fast Response Time . . . 200 ns Typ for

TTL-Level Input Step

Extremely Low Input Bias Current

5 pA Typ

Output Compatible With TTL, MOS, and

CMOS

Built-In ESD Protection

description

The TLV2354 consists of four independent,

low-power comparators specifically designed for

single power-supply applications and operateS

with power-supply rails as low as 2 V. When

powered from a 3-V supply, the typical supply

current is only 240 mA.

The TLV2354 is designed using the Texas Instruments LinCMOSE technology and, therefore, features an

extremely high input impedance (typically greater than 1012 W), which allows direct interfacing with

high-impedance sources. The outputs are N-channel open-drain configurations that require an external pullup

resistor to provide a positive output voltage swing, and they can be connected to achieve positive-logic

wired-AND relationships. The TLV2354I is fully characterized for operation from – 40°C to 85°C. The TLV2354M

is fully characterized for operation from – 55°C to 125°C.

The TLV2354 has internal electrostatic-discharge (ESD)-protection circuits and has been classified with a

1000-V ESD rating using human body model testing. However, care should be exercised in handling this device

as exposure to ESD may result in degradation of the device parametric performance.