TLV2352IPWR集成电路（IC）的比较器规格书PDF中文资料

TLV2352IPWR属于集成电路（IC）的比较器。由美国德州仪器公司制造生产的TLV2352IPWR比较器逻辑比较器系列产品用于根据以数字格式表示的信息比较结果来生成输出；身份型比较器指示两个输入是否相同，幅度型比较器还指示两个输入不相同时哪个较大。它们不同于比较两个模拟输入幅度的器件，后者称为线性比较器且单独分类。

Wide Range of Supply Voltages

2 V to 8 V

Fully Characterized at 3 V and 5 V

Very-Low Supply-Current Drain

120 mA Typ at 3 V

Output Compatible With TTL, MOS, and

CMOS

Fast Response Time . . . 200 ns Typ for

TTL-Level Input Step

High Input Impedance . . . 1012 W Typ

Extremely Low Input Bias Current

5 pA Typ

Common-Mode Input Voltage Range

Includes Ground

Built-In ESD Protection

description

The TLV2352 consists of two independent,

low-power comparators specifically designed for

single power-supply applications and operates

with power-supply rails as low as 2 V. When

powered from a 3-V supply, the typical supply

current is only 120 mA.

The TLV2352 is designed using the Texas Instruments LinCMOSE technology and therefore features an

extremely high input impedance (typically greater than 1012 W), which allows direct interfacing with

high-impedance sources. The outputs are N-channel open-drain configurations that require an external pullup

resistor to provide a positive output voltage swing, and they can be connected to achieve positive-logic

wired-AND relationships. The TLV2352I is fully characterized at 3 V and 5 V for operation from – 40°C to 85°C.

The TLV2352M is fully characterized at 3 V and 5 V for operation from – 55°C to 125°C.

The TLV2352 has internal electrostatic-discharge (ESD)-protection circuits and has been classified with a

1000-V ESD rating using Human Body Model testing. However, care should be exercised in handling this device

as exposure to ESD may result in degradation of the device parametric performance.