TLV117115DCYT集成电路（IC）的线性+开关稳压器规格书PDF中文资料

TLV117115DCYT属于集成电路（IC）的线性+开关稳压器。由德州仪器制造生产的TLV117115DCYT稳压器 - 线性线性稳压器用于提供稳定的输出电压，无论负载电流、输入电压或环境因素如何变化，这些输出电压通常都要保持不变。它们的工作原理要求输入电压维持在高于所需的输出电压，而且要超出某个最小量，并且在工作时会将输入端的任何多余电压转换为热量。对于大多数应用而言，虽然这种稳压器的效率低于开关模式的稳压器，但它们通常更适合对噪声高度敏感的应用。

1FEATURES

2• Accuracy: 1.5% (typ)

• Low IQ: 100 μA (max)

– 500x Lower Than Standard 1117 Devices

• VIN: 2.0 V to 5.5 V

– Absolute Maximum VIN: 6.0 V

• Stable with 0-mA Output Current

• Low Dropout: 455 mV at 1 A for VOUT = 3.3 V

• High PSRR: 65 dB at 1 kHz

• Minimum Ensured Current Limit: 1.1 A

• Stable with Cost-Effective Ceramic Capacitors:

– With 0-Ω ESR

• Temperature Range: –40°C to +125°C

• Thermal Shutdown and Overcurrent Protection

• Available Package: SOT223

– See the Package Option Addendum at the

end of this document for a complete list of

available voltage options.

APPLICATIONS

• Set Top Boxes

• TVs and Monitors

• PC Peripherals, Notebooks, and Motherboards

• Modems and Other Communication Products Cost•

Switching Power-Supply Post-Regulation

DESCRIPTION

The TLV1171 low-dropout (LDO) linear regulator is a

low input voltage version of the popular 1117 voltage

regulator.

The TLV1171 is an extremely low-power device that

consumes 500x lower quiescent current than the

traditional 1117 voltage regulator, making the

TLV1171 suitable for applications that mandate very

low standby current. The TLV1171 LDO is also stable

with 0 mA of load current; there is no minimum load

requirement, making the device an ideal choice for

applications where the regulator is required to power

very small loads during standby in addition to large currents on the order of 1 A during normal operation.

The TLV1171 offers excellent line and load transient

performance, resulting in very small magnitude output

voltage undershoots and overshoots when the load

current requirement changes from less than 1 mA to

more than 500 mA.

A precision band gap and error amplifier provides

1.5% accuracy. A very high power-supply rejection

ratio enables the device to be used for postregulation

after a switching regulator. Other valuable

features include low output noise and low-dropout

voltage.

The device is internally compensated to be stable

with 0-Ω equivalent series resistance (ESR)

capacitors. These key advantages enable the use of

cost-effective, small-size ceramic capacitors. Cost•

effective capacitors that have higher bias voltages

and temperature derating can also be used if desired.

The TLV1171 is available in a SOT223 package. For

alternate pin outs of the device, refer to the

TLV1117LV.