TLI493D-W2BW A0中文资料XENSIV ™ - TLI493D-W2BW A0 全新超小型节能 3D 磁传感器开辟了新的设计选择数据手册Infineon规格书

描述 Description

The Infineon XENSIVTM is the device for industrial and consumer applications: the TLI493D-W2BW. It uses our latest 3D Hall generation and is housed in an extremely small wafer-level package. With an 87 percent smaller footprint and 46 percent less height than previous comparable products, the sensor paves the way for new design options.
Due to the small WLB-5 package (1.13 mm x 0.93 mm x 0.59 mm) and the low current consumption of 7 nA in power-down mode, the magnetic sensor is also suitable for use in applications that previously used resistor-based or optical solutions. 
In particular, the low height of the TLI493D-W2BW is helpful in extremely space-critical applications such as BLDC commutation in micromotors or control elements such as joysticks or game consoles. It enables designs with double-sided PCBs or positioning of the sensor between two PCBs. This allows optimal use of the available space; for example, additional components can be placed above the sensor.
TLI493D-W2BW is available in 4 different variants ending with A0, A1, A2 or A3. The underlying feature is the so called Bus mode configuration of this device. It’s possible to connect up to 4 sensors to one I²C bus. The specific addressing is then done via 4 different variants.

• TLI493D-W2BW A0, link to
• TLI493D-W2BW A1, link to
• TLI493D-W2BW A2, link to
• TLI493D-W2BW A3, link to

特性 Features

• 3D (X, Y, Z) magnetic flux density sensing of ±160 mT
• Programmable flux resolution down to typ. 65 µT
• Extremely small form factor: typ. 1.13 mm * 0.93 mm * 0.59 mm
• X-Y angular measurement mode
• Power down mode with 7 nA (typ.) power consumption
• 12-bit data resolution for each measurement direction plus 10-bit temperature sensor
• Variable update frequencies and power modes (configurable during operation)
• Temperature range Tj = -40°C…125°C, supply voltage range = 2.8 V…3.5 V
• Triggering by external microcontroller possible via I2 C protocol
• Interrupt signal to indicate a valid measurement to the microcontroller

应用 Application

• Anti tempering protection in smart meters
• Joysticks e.g. for medical equipment, cranes, CCTV-control, game consoles
• Control elements e.g. white goods multifunction knobs
• Industrial joysticks
• Ergonomic push- and control buttons on domestic appliances and power tools
• Position control in robotics