Initial release

1 Description The core of the shields is the TLD7002-16ES which features: • Output current up to 16 x 76.5 mA • UART over CAN interface up to 2 Mbit/s compliant with ISO11898-2 (2016) CAN physical layer • 16 independent 14-bit PWM engines from 100 Hz up to 2 kHz • Integrated diagnostics for l

文件：1.76478 Mbytes 页数：14 Pages

Infineon

英飞凌

适用于Arduino的TLD7002-16SHIELD

TLD7002-16SHIELD 是一款与 Arduino UNO 兼容的 LED 驱动器发光。TLD7002-16ES 是一款 16 个独立通道 LED 驱动器，独立输出电流为 5 mA 至 76 mA，并带有 UART 和 CAN 接口。Arduino 驱动 16 个中功率 LED 的唯一连接是 UART 接口和可选的 TLD7002-16ES GPIN0引脚，该引脚位于 TLD7002-16ES 瞬时可编程 (OTP) 内存编程/仿真期间支持芯片选择。 • 输出电流高达16 x 76.5 mA\n• UART通过CAN接口，速率高达2 Mbit/s\n• 16个独立的14位PWM引擎\n• 集成诊断负载监控\n• 符合ISO26262标准的开发;

Infineon

英飞凌

LITIX™ Pixel Rear Multi-channel LED driver

Features • 16 channel device with integrated and protected output stages, optimized to drive LEDs • High regulated output current up to 76.5 mA per channel • Parallel output operation for higher load currents • 16 independent 6-bit configurable global output current configurations ranging from

文件：2.9708 Mbytes 页数：82 Pages

Infineon

英飞凌

LITIX™ Pixel Rear Multi-channel LED driver Z8F80321004

About this document Kit description TLD7002-16ES: 16 channel device with integrated and protected output stages 32 red LED load – 2 LED per output channel Set of cables Scope and purpose The scope of this user manual is to provide instructions on the use of the TLD7002-16LITE_KIT. The TLD70

文件：1.65951 Mbytes 页数：17 Pages

Infineon

英飞凌