TLC7225IDWR集成电路（IC）的数模转换器（DAC）规格书PDF中文资料

TLC7225IDWR属于集成电路（IC）的数模转换器（DAC）。由美国德州仪器公司制造生产的TLC7225IDWR数模转换器（DAC）数模转换器（DAC、D/A、D2A 或 D 转 A）可将数字信号转换为缓冲或无缓冲的模拟电压或电流。DAC 架构是否适合特定应用，要取决于分辨率和采样频率。DAC 通常用于音乐播放器，将数字数据流转换为模拟音频流。它们还用于电视和手机，将数字视频数据转换为模拟视频信号，再连接到屏幕驱动器，以显示单色或彩色图像。

Four 8-Bit D/A Converters With Individual

References

Direct Bipolar Operation Without an

External Level-Shift Amplifier

Microprocessor Compatible

TTL/CMOS Compatible

Single Supply Operation Possible

Simultaneous Update Facility

Binary Input Coding

applications

Process Control

Automatic Test Equipment

Automatic Calibration of Large System

Parameters e.g., Gain/Offset

description

The TLC7225 consists of four 8-bit voltage-output digital-to-analog converters (DACs), with output buffer

amplifiers and interface logic with double register-buffering.

Separate on-chip latches are provided for each of the DACs. Data is transferred into one of these data latches

through a common 8-bit TTL/CMOS-compatible (5 V) input port. Control inputs A0 and A1 determine which DAC

is loaded when WR goes low. Only the data held in the DAC registers determines the analog outputs of the

converters. The double register buffering allows simultaneous update of all four outputs under control of LDAC.

All logic inputs are TTL- and CMOS-level compatible and the control logic is speed compatible with most 8-bit

microprocessors. Each DAC includes an output buffer amplifier capable of driving up to 5 mA of output current.

The TLC7225 performance is specified for input reference voltages from 2 V to VDD – 4 V with dual supplies.

The voltage-mode configuration of the DACs allow the TLC7225 to be operated from a single power-supply rail

at a reference of 10 V.

The TLC7225 is fabricated in a LinBiCMOS process that has been specifically developed to allow high-speed

digital logic circuits and precision analog circuits to be integrated on the same chip. The TLC7225 has a common

8-bit data bus with individual DAC latches. This provides a versatile control architecture for simple interface to

microprocessors. All latch-enable signals are level triggered.

Combining four DACs, four operational amplifiers, and interface logic into a small, 0.3-inch wide, 24-terminal

SOIC allows significant reduction in board space requirements and offers increased reliability in systems using

multiple converters. The pinout optimizes board layout with all of the analog inputs and outputs at one end of

the package and all of the digital inputs at the other.

The TLC7225C is characterized for operation from 0°C to 70°C. The TLC7225I is characterized for operation

from –25°C to 85°C.