TLC5628CN集成电路（IC）的数模转换器（DAC）规格书PDF中文资料

TLC5628CN属于集成电路（IC）的数模转换器（DAC）。由美国德州仪器公司制造生产的TLC5628CN数模转换器（DAC）数模转换器（DAC、D/A、D2A 或 D 转 A）可将数字信号转换为缓冲或无缓冲的模拟电压或电流。DAC 架构是否适合特定应用，要取决于分辨率和采样频率。DAC 通常用于音乐播放器，将数字数据流转换为模拟音频流。它们还用于电视和手机，将数字视频数据转换为模拟视频信号，再连接到屏幕驱动器，以显示单色或彩色图像。

Eight 8-Bit Voltage Output DACs

5-V Single-Supply Operation

Serial Interface

High-Impedance Reference Inputs

Programmable 1 or 2 Times Output Range

Simultaneous Update Facility

Internal Power-On Reset

Low-Power Consumption

Half-Buffered Output

applications

Programmable Voltage Sources

Digitally Controlled Amplifiers/Attenuators

Mobile Communications

Automatic Test Equipment

Process Monitoring and Control

Signal Synthesis

description

The TLC5628C and TLC5628I are octal 8-bit voltage output digital-to-analog converters (DACs) with buffered

reference inputs (high impedance). The DACs produce an output voltage that ranges between either one or two

times the reference voltages and GND and are monotonic. The device is simple to use, running from a single

supply of 5 V. A power-on reset function is incorporated to ensure repeatable start-up conditions.

Digital control of the TLC5628C and TLC5628I are over a simple three-wire serial bus that is CMOS compatible

and easily interfaced to all popular microprocessor and microcontroller devices. The 12-bit command word

comprises eight bits of data, three DAC select bits, and a range bit, the latter allowing selection between the

times 1 or times 2 output range. The DAC registers are double buffered, allowing a complete set of new values

to be written to the device, then all DAC outputs are updated simultaneously through control of LDAC. The digital

inputs feature Schmitt triggers for high-noise immunity.

The 16-terminal small-outline (D) package allows digital control of analog functions in space-critical

applications. The TLC5628C is characterized for operation from 0°C to 70°C. The TLC5628I is characterized

for operation from –40°C to 85°C. The TLC5628C and TLC5628I do not require external trimming.