TLC541中文资料8 位，40kSPS ADC 串行输出，片上 12 通道 模拟 Mux、11 通道数据手册TI规格书

描述 Description

The TLC540 and TLC541 are CMOS A/ D converters built around an 8-bit switched-capacitor successive-approximation A/D converters. They are designed for serial interface to a microprocessor or peripheral via a 3-state output with up to four control inputs, including independent SYSTEM CLOCK, I/O CLOCK, chip select (CS\\), and ADDRESS INPUT. A 4-MHz system clock for the TLC540 and a 2.1-MHz system clock for the TLC541 with a design that includes simultaneous read/write operation allow high-speed data transfers and sample rates of up to 75,180 samples per second for the TLC540 and 40,000 samples per second for the TLC541. In addition to the high-speed converter and versatile control logic, there is an on-chip 12-channel analog multiplexer that can be used to sample any one of 11 inputs or an internal self-test voltage, and a sample-and-hold that can operate automatically or under microprocessor control. The converters incorporated in the TLC540 and TLC541 feature differential high-impedance reference inputs that facilitate ratiometric conversion, scaling, and analog circuitry isolation from logic and supply noises. A switched-capacitor design allows low-error (±0.5 LSB) conversion in 9 us for the TLC540 and 17 us for the TLC541 over the full operating temperature range. The TLC540I and TLC541I are characterized for operation from \\x9640°C to 85°C.The TLC541M is characterized for operation from \\x9655°C to 125°C.

特性 Features

·8-Bit Resolution A/D Converter
·Microprocessor Peripheral or Stand-Alone Operation
·On-Chip 12-Channel Analog Multiplexer
·Built-In Self-Test Mode ·Software-Controllable Sample and Hold
·Total Unadjusted Error ... ±0.5 LSB Max
·TLC541 Is Direct Replacement for Motorola MC145040 and National Semiconductor ADC0811. TLC540 Is Capable of Higher Speed
·Pinout and Control Signals Compatible With TLC1540 Family of 10-Bit A/D Converters
·CMOS Technology

简介

TLC541属于集成电路（IC）的模数转换器（ADC）。由TI制造生产的TLC541模数转换器（ADC）模数转换器（ADC、A/D 或 A 转 D）对模拟信号进行采样，例如由麦克风采集的声音或传感器的输出，然后将其转换为数字信号。一般来说，数字输出是二进制补码二进制数，与输入成比例。输入类型可能是差分、伪差分或单端输入。模数转换器可按照位数、采样率、输入数、接口、转换器数和架构（例如自适应增量、双斜率、折叠、流水线、SAR、三角积分、两步式）进行选择。