TLC3702CPSR.A中文资料德州仪器数据手册PDF规格书

Push-Pull CMOS Output Drives Capacitive

Loads Without Pullup Resistor,

IO = ± 8 mA

Very Low Power . . . 100 μW Typ at 5 V

Fast Response Time . . . tPLH = 2.7 μs Typ

With 5-mV Overdrive

Single-Supply Operation . . . 3 V to 16 V

TLC3702M . . . 4 V to 16 V

On-Chip ESD Protection

description

The TLC3702 consists of two independent

micropower voltage comparators designed to

operate from a single supply and be compatible

with modern HCMOS logic systems. They are

functionally similar to the LM339 but use onetwentieth

of the power for similar response times.

The push-pull CMOS output stage drives

capacitive loads directly without a powerconsuming

pullup resistor to achieve the stated

response time. Eliminating the pullup resistor not

only reduces power dissipation, but also saves

board space and component cost. The output

stage is also fully compatible with TTL

requirements.

Texas Instruments LinCMOS™ process offers

superior analog performance to standard CMOS

processes. Along with the standard CMOS

advantages of low power without sacrificing

speed, high input impedance, and low bias

currents, the LinCMOS™ process offers

extremely stable input offset voltages with large

differential input voltages. This characteristic

makes it possible to build reliable CMOS

comparators.

The TLC3702C is characterized for operation over the commercial temperature range of 0°C to 70°C. The

TLC3702I is characterized for operation over the extended industrial temperature range of −40°C to 85°C. The

TLC3702M is characterized for operation over the full military temperature range of −55°C to 125°C.