TLC251CP.A中文资料德州仪器数据手册PDF规格书

Wide Range of Supply Voltages

1.4-V to 16-V

True Single-Supply Operation

Common-Mode Input Voltage Range

Includes the Negative Rail

Low Noise . . . 30 nV/√Hz Typ at 1-kHz

(High Bias)

ESD Protection Exceeds 2000 V Per

MIL-STD-833C, Method 3015.1

description

The TLC251C, TLC251AC, and TLC251BC are

low-cost, low-power programmable operational

amplifiers designed to operate with single or dual

supplies. Unlike traditional metal-gate CMOS

operational amplifiers, these devices utilize Texas

Instruments silicon-gate LinCMOS process,

giving them stable input offset voltages without

sacrificing the advantages of metal-gate CMOS.

This series of parts is available in selected grades of input offset voltage and can be nulled with one external

potentiometer. Because the input common-mode range extends to the negative rail and the power consumption

is extremely low, this family is ideally suited for battery-powered or energy-conserving applications. A

bias-select pin can be used to program one of three ac performance and power-dissipation levels to suit the

application. The series features operation down to a 1.4-V supply and is stable at unity gain.

These devices have internal electrostatic-discharge (ESD) protection circuits that prevent catastrophic failures

at voltages up to 2000 V as tested under MIL-STD-883C, Method 3015.1. However, care should be exercised

in handling these devices as exposure to ESD may result in a degradation of the device parametric

performance.

Because of the extremely high input impedance and low input bias and offset currents, applications for the

TLC251C series include many areas that have previously been limited to BIFET and NFET product types. Any

circuit using high-impedance elements and requiring small offset errors is a good candidate for cost-effective

use of these devices. Many features associated with bipolar technology are available with LinCMOS

operational amplifiers without the power penalties of traditional bipolar devices. Remote and inaccessible

equipment applications are possible using the low-voltage and low-power capabilities of the TLC251C series.

In addition, by driving the bias-select input with a logic signal from a microprocessor, these operational amplifiers

can have software-controlled performance and power consumption. The TLC251C series is well suited to solve

the difficult problems associated with single battery and solar cell-powered applications.

The TLC251C series is characterized for operation from 0°C to 70°C.