TLC1551IDWR.A中文资料德州仪器数据手册PDF规格书

Power Dissipation . . . 40 mW Max

Advanced LinEPIC Single-Poly Process

Provides Close Capacitor Matching for

Better Accuracy

Fast Parallel Processing for DSP and μP

Interface

Either External or Internal Clock Can Be

Used

Conversion Time . . . 6 μs

Total Unadjusted Error . . . ±1 LSB Max

CMOS Technology

description

The TLC1550x and TLC1551 are data acquisition

analog-to-digital converters (ADCs) using a 10-bit,

switched-capacitor, successive-approximation network.

A high-speed, 3-state parallel port directly

interfaces to a digital signal processor (DSP) or

microprocessor (μP) system data bus. D0 through

D9 are the digital output terminals with D0 being

the least significant bit (LSB). Separate power

terminals for the analog and digital portions

minimize noise pickup in the supply leads.

Additionally, the digital power is divided into two

parts to separate the lower current logic from the

higher current bus drivers. An external clock can be

applied to CLKIN to override the internal system

clock if desired.

The TLC1550I and TLC1551I are characterized for

operation from −40°C to 85°C. The TLC1550M is

characterized over the full military range of −55°C

to 125°C.