TLC0832IDR集成电路（IC）的模数转换器（ADC）规格书PDF中文资料

TLC0832IDR属于集成电路（IC）的模数转换器（ADC）。由德州仪器制造生产的TLC0832IDR模数转换器（ADC）模数转换器（ADC、A/D 或 A 转 D）对模拟信号进行采样，例如由麦克风采集的声音或传感器的输出，然后将其转换为数字信号。一般来说，数字输出是二进制补码二进制数，与输入成比例。输入类型可能是差分、伪差分或单端输入。模数转换器可按照位数、采样率、输入数、接口、转换器数和架构（例如自适应增量、双斜率、折叠、流水线、SAR、三角积分、两步式）进行选择。

8-Bit Resolution

Easy Microprocessor Interface or

Standalone Operation

Operates Ratiometrically or With 5-V

Reference

Single Channel or Multiplexed Twin

Channels With Single-Ended or Differential

Input Options

Input Range 0 to 5 V With Single 5-V Supply

Inputs and Outputs Are Compatible With

TTL and MOS

Conversion Time of 32 ms at

fclock = 250 kHz

Designed to Be Interchangeable With

National Semiconductor ADC0831 and

ADC0832

Total Unadjusted Error . . . ± 1 LSB

description

These devices are 8-bit successive-approximation analog-to-digital converters. The TLC0831 has single input

channels; the TLC0832 has multiplexed twin input channels. The serial output is configured to interface with

standard shift registers or microprocessors.

The TLC0832 multiplexer is software configured for single-ended or differential inputs. The differential analog

voltage input allows for common-mode rejection or offset of the analog zero input voltage value. In addition, the

voltage reference input can be adjusted to allow encoding any smaller analog voltage span to the full 8 bits of

resolution.

The operation of the TLC0831 and TLC0832 devices is very similar to the more complex TLC0834 and TLC0838

devices. Ratiometric conversion can be attained by setting the REF input equal to the maximum analog input

signal value, which gives the highest possible conversion resolution. Typically, REF is set equal to VCC (done

internally on the TLC0832).

The TLC0831C and TLC0832C are characterized for operation from 0°C to 70°C. The TLC0831I and TLC0832I

are characterized for operation from –40°C to 85°C.