TL5002CD.A中文资料德州仪器数据手册PDF规格书

Complete PWM Power Control

3.6-V to 40-V Operation

Internal Undervoltage-Lockout Circuit

Oscillator Frequency . . . 20 kHz to 500 kHz

Variable Dead Time Provides Control Over

Total Range

Ideal Controller for DDR Memory

Application

Uncommitted Error Amplifier Inputs

description

The TL5002 incorporates on a single monolithic chip all the functions required for a pulse-width-modulation

(PWM) control circuit. Designed primarily for power-supply control, the TL5002 contains an error amplifier, a

regulator, an oscillator, a PWM comparator with a dead-time-control input, undervoltage lockout (UVLO), and

an open-collector output transistor.

The error-amplifier input common-mode voltage ranges from 0.9 V to 1.5 V. Dead-time control (DTC) can be

set to provide 0% to 100% dead time by connecting an external resistor between DTC and GND. The oscillator

frequency is set by terminating RT with an external resistor to GND. During low VCC conditions, the UVLO circuit

turns the output off until VCC recovers to its normal operating range.

The TL5002 is characterized for operation from −40°C to 85°C.