LOW DROPOUT REGULATOR

DESCRIPTION The TK732xx is a controller IC for a low dropout voltage regulator. The TK732xx and the external PNP power transistor provide standard output voltages from 2 to 11 V and output current from 100 mA to 5 A. By utilizing an external PNP power transistor, low dropout voltage at high curre

文件：117.63 Kbytes 页数：16 Pages

TOKO

LOW DROPOUT REGULATOR

DESCRIPTION The TK732xx is a controller IC for a low dropout voltage regulator. The TK732xx and the external PNP power transistor provide standard output voltages from 2 to 11 V and output current from 100 mA to 5 A. By utilizing an external PNP power transistor, low dropout voltage at high curre

文件：117.63 Kbytes 页数：16 Pages

TOKO

LOW DROPOUT REGULATOR

DESCRIPTION The TK732xx is a controller IC for a low dropout voltage regulator. The TK732xx and the external PNP power transistor provide standard output voltages from 2 to 11 V and output current from 100 mA to 5 A. By utilizing an external PNP power transistor, low dropout voltage at high curre

文件：117.63 Kbytes 页数：16 Pages

TOKO

LOW DROPOUT REGULATOR

DESCRIPTION The TK732xx is a controller IC for a low dropout voltage regulator. The TK732xx and the external PNP power transistor provide standard output voltages from 2 to 11 V and output current from 100 mA to 5 A. By utilizing an external PNP power transistor, low dropout voltage at high curre

文件：117.63 Kbytes 页数：16 Pages

TOKO

VCXO (Voltage-Controlled Crystal Oscillator) 27 MHz 3.3V

General Description The Vaishali VT73227 is a single-chip, low-jitter Voltage-Controlled-Crystal-Oscillator. The device accepts a 27 MHz, 20 pF (pull range of 200 ppm) crystal input, and produces a low jitter output at the same frequency. A 0 to 3.0V control signal is used to fine tune the output

文件：67.09 Kbytes 页数：3 Pages

VAISH

威世

VCXO (Voltage-Controlled Crystal Oscillator) 27 MHz 3.3V

General Description The Vaishali VT73227 is a single-chip, low-jitter Voltage-Controlled-Crystal-Oscillator. The device accepts a 27 MHz, 20 pF (pull range of 200 ppm) crystal input, and produces a low jitter output at the same frequency. A 0 to 3.0V control signal is used to fine tune the output

文件：67.09 Kbytes 页数：3 Pages

VAISH

威世