CAN FD signal improvement transceiver with Standby mode

文件：439.61 Kbytes 页数：36 Pages

恩XP

CAN FD signal improvement transceiver with Standby mode

General description The TJA1462 is a member of the TJA146x family of transceivers that provide an interface between a Controller Area Network (CAN) or CAN FD (Flexible Data rate) protocol controller and the physical two-wire CAN bus. TJA146x transceivers implement the CAN physical layer as def

文件：380.59 Kbytes 页数：33 Pages

恩XP

CAN FD signal improvement transceiver with Standby mode

General description The TJA1462 is a member of the TJA146x family of transceivers that provide an interface between a Controller Area Network (CAN) or CAN FD (Flexible Data rate) protocol controller and the physical two-wire CAN bus. TJA146x transceivers implement the CAN physical layer as def

文件：380.59 Kbytes 页数：33 Pages

恩XP

CAN FD signal improvement transceiver with Standby mode

文件：439.61 Kbytes 页数：36 Pages

恩XP

CAN FD signal improvement transceiver with Standby mode

文件：439.61 Kbytes 页数：36 Pages

恩XP

具有待机模式的CAN信号改善能力(SIC)收发器

具有待机模式的TJA1462 CAN信号质量提升(SIC)收发器是TJA146x收发器系列的一个成员，该系列实现了ISO11898-2:2024中定义的CAN SIC。TJA1462支持ISO11898-2:2024和SAE J2284-(1-5)中定义的CAN物理层，能够与高速传统CAN和CAN FD完全互联互通。\r\n\r\nCAN信号质量提升大大减少了网络上的信号振铃，从而能够在更大的拓扑中以5Mbit/s的速度进行可靠的CAN FD通信。此外，TJA1462具有更严格的位时序对称性能，可实现高达8Mbit/s的CAN FD通信。\r\n\r\nTJA1462向后兼容，可直接取代传统C

恩XP

具有待机模式的CAN信号改善能力(SIC)收发器

具有待机模式的TJA1462 CAN信号质量提升(SIC)收发器是TJA146x收发器系列的一个成员，该系列实现了ISO11898-2:2024中定义的CAN SIC。TJA1462支持ISO11898-2:2024和SAE J2284-(1-5)中定义的CAN物理层，能够与高速传统CAN和CAN FD完全互联互通。\r\n\r\nCAN信号质量提升大大减少了网络上的信号振铃，从而能够在更大的拓扑中以5Mbit/s的速度进行可靠的CAN FD通信。此外，TJA1462具有更严格的位时序对称性能，可实现高达8Mbit/s的CAN FD通信。\r\n\r\nTJA1462向后兼容，可直接取代传统C

恩XP