TJA1145AT数据手册恩XP中文资料规格书

描述 Description

The TJA1145A is a high-speed CAN transceiver that provides an interface between a controller area network (CAN) protocol controller and the physical two-wire CAN bus. The transceiver is designed for high-speed CAN and CAN FD applications in the automotive industry, providing differential transmit and receive capability to a microcontroller with a CAN protocol controller.
TJA1145A supports reliable communication in the CAN FD fast phase at data rates up to 5 Mbit/s.
The TJA1145A features very low power consumption in standby and sleep modes and supports ISO 11898-2:2016 compliant CAN Partial Networking by means of a selective wake-up function.

特性 Features

General Features
• ISO 11898-2:2016 and SAE J2284-1 to SAE J2284-5 compliant
• Data rates up to 5 Mbit/s in the CAN FD fast phase
• Autonomous bus biasing
• TJA1145ATK/FD supports FD passive behaviour to CAN FD data
• Fully compatible with the TJA1145, with improved EMC performance
Designed for Automotive Applications
• ±6 kV ESD protection, according to IEC TS 62228 on pins BAT and WAKE and on the CAN bus pins
• CAN bus pins short-circuit proof to ±58 V
• Suitable for use in 12 V and 24 V systems
• AEC-Q100 qualified
Advanced ECU Power Management System
• Very low-current standby and sleep modes, with full wake-up capability
• Entire node can be powered down via the inhibit output
• Remote wake-up capability via HS CAN wake-up pattern or selective wake-up frame detection
• Selective wake-up for bit rates up to 1 Mbit/s
• Local wake-up via the WAKE pin
• Wake-up source recognition
Protection and Diagnosis
• 16-, 24- or 32-bit SPI for configuration, control and diagnosis
• Transmit Data (TXD) dominant time-out function with diagnosis
• Overtemperature warning and shut-down
• Undervoltage detection and recovery on pins VCC, VIO and BAT
• Cold start diagnosis (via bits PO and NMS)

应用 Application

Automotive

• High-speed CAN and CAN FD applications in the automotive industry.