TJA1024HG中文资料Quad LIN 2.2A/SAE J2602 transceiver数据手册恩XP规格书

描述 Description

The TJA1024 is a quad LIN transceiver that provides the interface between a LocalInterconnect Network (LIN) master/slave protocol controller and the physical bus in a LINnetwork. It comprises two independent and separated dual LIN transceiver blocks on asingle die (only the ground pins GND1 and GND2 are connected internally) with dedicatedsupply pins (VBAT1 for LIN 1/LIN2 and VBAT2 for LIN3/LIN4).
The TJA1024 is primarily intended for in-vehicle subnetworks using baud rates up to20 kBd and is compliant with LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2A and SAE J2602. TheTJA1024 is software compatible with the TJA1022, TJA1027 and TJA1029.
The transmit data streams generated by the protocol controller are converted by theTJA1024 into optimized bus signals shaped to minimize ElectroMagnetic Emissions(EME). The LIN bus output pins are pulled HIGH via internal termination resistors. For amaster application, an external resistor in series with a diode should be connectedbetween pin VBATx and the respective LIN pins. The receivers detect receive data streamson the LIN bus input pins and transfer them via pins RXDx to the microcontroller.
Power consumption is very low when all four transceivers are in Sleep mode. However,the TJA1024 can still be woken up via pins LINx and SLPx_N.

特性 Features

General
• Four LIN transceivers in a single package
• LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2A and SAE J2602 compliant
• Baud rate up to 20 kBd
• Very low EME
• Very low current consumption in Sleep mode with remote LIN wake-up
• Input levels compatible with 3.3 V and 5 V devices
• Integrated termination resistors for LIN slave applications
• Passive behavior in unpowered state
• Operational during cranking pulse: full operation from 5 V upwards
• Undervoltage detection
• K-line compatible
• Leadless DHVQFN24 package (3.5 mm × 5.5 mm) with improved Automated OpticalInspection (AOI)
• Dark green product (halogen free and Restriction of Hazardous Substances (RoHS)compliant)
• Software-compatible with the TJA1022, TJA1027 and TJA1029
Protection
• Very high ElectroMagnetic Immunity (EMI)
• Very high ESD robustness: ±8 kV according to IEC 61000-4-2 for pins LINx and VBATx
• Bus terminal and battery pins protected against transients in the automotiveenvironment (ISO 7637)
• Bus terminal short-circuit proof to battery and ground
• Thermally protected
• Initial TXD dominant check when switching to Normal mode
• TXD dominant time-out function