TIP606-DOC中文资料TEWS数据手册PDF规格书

Application Information

The TIP606 is an IndustryPack® compatible module and is designed for avionic test environments. It provides 16 optically isolated differential inputs for high unipolar input voltage which may exceed the supply voltage of the module. The inputs can withstand input voltage up to 44V maximum between the two differential input pins.

Due to the differential inputs of the TIP606, it is even possible to use the module in noisy environments. The TIP606 provides a high differential input resistance of 112kohms typically.

The interface circuit will detect a logic 1, if the differential voltage is typically greater than +14.0V and it will detect a logic 0, if the input voltage is typically lower than +3.5V. The inputs are isolated from the IP interface via optocouplers. Each input is capable of generating

interrupts on rising or falling edges of the input signal. It is also possible to disable the generation of interrupts and poll the input register for new data.

All inputs have an electronic debounce circuit. The debounce time is programmable in a range from 900μs up to 230ms in 256 steps of 900μs. The debounce circuit can also be disabled. The TIP606 is designed for an operating temperature from -40°C to +85°C.

The driver software TIP606-SW-xx provides functions to configure the TIP606, read the input status and connect software events to input state changes.