TIOL112DRCR集成电路（IC）的驱动器接收器收发器规格书PDF中文资料

1 Features

• 7-V to 36-V supply voltage

• PNP, NPN or IO-Link configurable output

– IEC 61131-9 COM1, COM2 and COM3 Data

Rate Support

• Functional safety-capable

– Documentation available to aid in functional

safety system design

• Pin-compatible with TIOL111(x) with improved

performance

– Low residual Voltage of 0.5 V (typical) at

200 mA

– Active driver current limiting capability

– Improved thermal performance of the package

– Slower driver slew rates to reduce overshoots:

maximum of 750 ns

• Integrated protection features for robust systems

– Configurable driver overcurrent limit:

50 mA to 350 mA

– Active reverse polarity protection of up to 65 V

on L+, CQ and L-

– Fault indicator for overcurrent, overtemperature

and UVLO faults

– Safe and fast demagnetization of inductive

loads

– Extended ambient temperature operation:

–40°C to 125°C

• Integrated EMC protection on L+ and CQ

– ±8 kV IEC 61000-4-2 ESD contact discharge

– ±4 kV IEC 61000-4-4 electrical fast transient

– ±1.2 kV/500 Ω IEC 61000-4-5 surge

• Large capacitive load driving capability

• < 2-μA CQ leakage current

• < 1.5-mA quiescent supply current

• Integrated LDO options for up to 20 mA current

– TIOL1123: 3.3-V LDO

– TIOL1125: 5-V LDO

• Remote wake-up indication and wake-up

generation

• Small space-saving package options

– 3 mm x 3 mm 10-pin VSON package:

pin-compatible with TIOL111

– 2.45 mm x 1.7 mm BGA package

2 Applications

• Field Transmitters and actuators

• Factory automation

• Process automation

• IO-link PHY in remote IO

3 Description

The TIOL112(x) family of transceivers implements the

IO-Link interface for industrial bidirectional, point-topoint

communication. When the device is connected

to an IO-Link master through a three-wire interface,

the master can initiate communication and exchange

data with the remote node while the TIOL112(x) acts

as a complete physical layer for the communication.

These devices are capable of withstanding up to

1.2 kV (500 Ω) of IEC 61000-4-5 surge and feature

integrated reverse polarity protection. A simple pinprogrammable

interface allows easy interfacing with

the controller circuits. The output current limit can

be configured using an external resistor. TIOL112(x)

can be configured to generate wake-up pulse and be

used in IO-link master applications. Fault reporting

and internal protection functions are provided

for undervoltage, overcurrent and overtemperature

conditions.