PLL stereo decoder

GENERAL DESCRIPTION\nThe TEA5581 PLL stereo decoder is for car and medium-fi radios. It incorporates all the features provided by the TEA5580 together with a source selector, muting circuit and output amplifiers with adjustable gain. It also features a switch for radio or cassette function and a 228 • Wide supply voltage range\n• Automatic mono/stereo switching (pilot presence detector)\n• Smooth stereo-to-mono change-over at weak signals (signal-dependent stereo channel separation)\n• LED driver for stereo/mono indicator\n• Suppresses:\n   third harmonics (114 kHz) of multiplexed signal to pre;

恩XP

PLL stereo decoder

文件：133.99 Kbytes 页数：16 Pages

PHI

PHI

5-V, Zero-Drift, RRIO, 15-MHz, Presicion Op Amp

Features • Supply Voltage: 2.7 V to 5.5 V • Dual Supply: ±1.35 V to ±2.75 V • Low Offset Voltage: ±20 μV Maximum • Zero Drift: ±0.01 µV/°C • Rail-to-Rail Input and Output • Gain Bandwidth Product: 15 MHz • Slew Rate: 4.9 V/μs • Low Noise: 10 nV/√Hz at 1 kHz • No 1/f noise: 0.2-uVPP (0.1 H

文件：2.62651 Mbytes 页数：32 Pages

3PEAK

思瑞浦

μClamp ® 5.5V ESD & Surge Protection

Description μClamp® series of TVS diodes are designed to protect sensitive electronics from damage or latch-up due to EOS, lightning, CDE and ESD. They feature large cross-sectional area junctions for conducting high transient currents. These devices offer desirable characteristics for board

文件：550.19 Kbytes 页数：6 Pages

SEMTECH

先之科

μClamp ® 5.5V ESD & Surge Protection

Description μClamp® series of TVS diodes are designed to protect sensitive electronics from damage or latch-up due to EOS, lightning, CDE and ESD. They feature large cross-sectional area junctions for conducting high transient currents. These devices offer desirable characteristics for board

文件：550.19 Kbytes 页数：6 Pages

SEMTECH

先之科