采集型隔离模块

TExxxxAN是前级正负信号输入，后级正信号输出的有源隔离模块，模块内部嵌入了一个高效微功率电源，对产品内部电路供电。由于内部采用电磁隔离技术，相比光耦隔离具有更好的温漂特性和线性度，且功耗低，纹波小。此模块为两隔离，电源输入、信号输出和信号输入之间隔离。 ·两端隔离(信号输入侧与输出侧隔离)\n·高精度等级(0.1% F.S.)\n·高线性度(0.1% F.S.)\n·隔离电压(2KVAC/60s)\n·极低温漂(50PPM/℃，-40～+85℃范围内)\n·工业级(工作温度范围: -40～+85℃)\n·高可靠性（MTBF >500,000 小时）\n·低纹波噪声：≤35mVp-p(20MHz)\n·ESD防护(IEC/EN61000-4-2 Contact ±4KV perf.Criteria B) \n·小体积：DIP18封装（26*9.5*12.5mm）\n·信号负载能力：≥2KΩ(信号输出为最大时@10V);

Mornsun

金升阳

two-terminal isolation

文件：185.1 Kbytes 页数：3 Pages

MORNSUN

金升阳

Active high precision signal conditioning module with millivolt level positive and negative signal for input and output

FEATURES  Signal input, signal output, power input, andisolationpower output are all isolated fromeachother  High accuracy of 0.1% Full Scale  High linearity of 0.1% Full Scale  Isolation test voltage of 2.5kVDCfor 60 seconds Extremely low temperature coefficient of 35PPM/℃ Opera

文件：1.294 Mbytes 页数：4 Pages

MORNSUN

金升阳

Active high precision signal conditioning module with millivolt level positive and negative signal for input and output

FEATURES  Signal input, signal output, power input, andisolationpower output are all isolated fromeachother  High accuracy of 0.1% Full Scale  High linearity of 0.1% Full Scale  Isolation test voltage of 2.5kVDCfor 60 seconds Extremely low temperature coefficient of 35PPM/℃ Opera

文件：1.294 Mbytes 页数：4 Pages

MORNSUN

金升阳

Active high precision signal conditioning module with millivolt level positive and negative signal for input and output

FEATURES  Signal input, signal output, power input, andisolationpower output are all isolated fromeachother  High accuracy of 0.1% Full Scale  High linearity of 0.1% Full Scale  Isolation test voltage of 2.5kVDCfor 60 seconds Extremely low temperature coefficient of 35PPM/℃ Opera

文件：1.294 Mbytes 页数：4 Pages

MORNSUN

金升阳