TDE1707中文资料0.5 A智能电源开关数据手册ST规格书

描述 Description

The TDE1707BFP and TDE1707CFP are 0.5 A integrated power switches with up to 48 V power supply capability. Two output configurations are possible. The former is the load to GND (high-side mode) and the latter is the load to VS (low-side mode). This device is dedicated to proximity detectors; its internal +5 V supply can be used to supply external circuits (please refer to AN495 and AN1213 on www.st.com). A signal is internally generated to block the IN signal, and prevent the output switch, as long as an abnormal condition is detected. The power-on transition, as well as the chip overtemperature and the output overcurrent, generate this signal. A minimum delay of 25 μs (typ. value) is added to the trailing edge of this signal to ensure that a stable normal situation is present when the signal disappears. The delay (the disappearance of block signal) can be further increased by connecting a capacitor between pin 3 and ground. It can drive resistive or inductive loads.

特性 Features

• 0.5 A output current
• Low-side or high-side switch configuration
• Supply voltage range from 6 V to 48 V
• Overload and short-circuit protections
• Internal voltage clamping
• Supply and output reversal protection
• Thermal shutdown
• GND and VS open wire protection
• Adjustable delay at switch-on
• Indicator status LED driver
• +5 V regulated AUX voltage
• High burst immunity