2 x 15 W stereo Bridge Tied Load BTL audio amplifier

文件：393.96 Kbytes 页数：23 Pages

PHI

PHI

2 x 15 W stereo Bridge Tied Load (BTL) audio amplifier

General description\nThe TDA8946J is a dual-channel audio power amplifier with an output power of 2 × 15 W at an 8 Ω load and a 18 V supply. The circuit contains two Bridge Tied Load (BTL) amplifiers with an all-NPN output stage and standby/mute logic. The TDA8946J comes in a 17-pin DIL-bent-SIL (DB

恩XP

2 x 15 W BTL audio amplifier with DC gain control

General description The TDA8946AJ is a dual-channel audio power amplifier with DC gain control. It has an output power of 2 × 15 W at an 8 Ω load and an 18 V supply. The circuit contains two Bridge-Tied Load (BTL) amplifiers with an all-NPN output stage and standby/mute logic. The overall gain ca

文件：405.82 Kbytes 页数：20 Pages

恩XP

2 x 15 W stereo Bridge Tied Load BTL audio amplifier

文件：393.96 Kbytes 页数：23 Pages

PHI

PHI

2 x 15 W BTL audio amplifier with DC gain control

OverviewThe TDA8946AJ is a dual-channel audio power amplifier with DC gain control. It has an output power of 2x15 W at an 8 Ω load and an 18 V supply. The circuit contains two Bridge-Tied Load (BTL) amplifiers with an all-NPN output stage and standby/mute logic. The overall gain can be adjusted fro \n\n•Gain/volume adjustment via a DC control pin\n\n•Soft clipping\n\n•Operating at a low supply voltage\n\n•Standby and mute mode\n\n•No on/off switching plops\n\n•Low standby current\n\n•High supply voltage ripple rejection\n\n•Outputs short-circuit protected to ground, supply and across the load\;

恩XP