Class-D audio amplifier

General description The TDA8933 is a high efficiency class-D amplifier with low power dissipation. The continuous time output power is 2 × 10 W in a stereo half bridge application (RL = 8 Ω) or 1 × 20 W in a mono full bridge application (RL =16 Ω). Due to the low power dissipation the device ca

文件：265.16 Kbytes 页数：47 Pages

恩XP

Class-D audio amplifier

恩XP

Class D audio amplifier

The TDA8933B is a high-efficiency class D amplifier with low power dissipation. The device has two full differential inputs driving two independent outputs. It can be used in a mono full-bridge configuration (Bridge-Tied Load (BTL)) or as stereo half-bridge configuration (Single-Ended (SE)).

文件：244.86 Kbytes 页数：42 Pages

恩XP

Class D audio amplifier

The TDA8933B is a high-efficiency class D amplifier with low power dissipation. The device has two full differential inputs driving two independent outputs. It can be used in a mono full-bridge configuration (Bridge-Tied Load (BTL)) or as stereo half-bridge configuration (Single-Ended (SE)).

文件：244.86 Kbytes 页数：42 Pages

恩XP

Class-D audio amplifier

General description The TDA8933 is a high efficiency class-D amplifier with low power dissipation. The continuous time output power is 2 × 10 W in a stereo half bridge application (RL = 8 Ω) or 1 × 20 W in a mono full bridge application (RL =16 Ω). Due to the low power dissipation the device ca

文件：265.16 Kbytes 页数：47 Pages

恩XP

Class D Audio Amplifier

Overview The TDA8933B is a high-efficiency class D amplifier with low power dissipation.\nThe continuous time output power is 2 x 10 W in a stereo half-bridge application (RL= 8 Ω) or 1 x 20 W in a mono full-bridge application (RL=16 Ω). Due to the low power dissipation the device can be used withou Operating voltage from 10 V to 36 V asymmetrical or +-5 V to +-18 V symmetrical\nMono bridge-tied load (full-bridge) or stereo single-ended (half-bridge) application\nApplication without heat sink using thermally enhanced small outline package\nHigh efficiency and low-power dissipation\nThermal fold;

恩XP

Class-D audio amplifier

General description\nThe TDA8933 is a high efficiency class-D amplifier with low power dissipation. The continuous time output power is 2 × 10 W in a stereo half bridge application (RL = 8 Ω) or 1 × 20 W in a mono full bridge application (RL =16 Ω). Due to the low power dissipation the device can be ■ High efficiency\n■ Application without heat sink using thermally enhanced small outline package\n■ Operating voltage from 10 V to 36 V asymmetrical or ± 5 V to ± 18 V symmetrical\n■ Thermally protected\n■ Thermal foldback\n■ Current limiting to avoid audio holes\n■ Full short circuit proof to supp;

恩XP