Class-D audio amplifier

General description The TDA8932B is a high efficiency class-D amplifier with low power dissipation. The continuous time output power is 2 × 15 W in stereo half-bridge application (RL = 4 Ω) or 1 × 30 W in mono full-bridge application (RL = 8 Ω). Due to the low power dissipation the device can be

文件：319.42 Kbytes 页数：48 Pages

恩XP

Class-D audio amplifier

The TDA8932B is a high efficiency class-D amplifier with low power dissipation.\nThe continuous time output power is 2 x 15 W in stereo half-bridge application (RL= 4 Ω) or 1 x 30 W in mono full-bridge application (RL= 8 Ω). Due to the low power dissipation the device can be used without any externa Operating voltage from 10 V to 36 V asymmetrical or +-5 V to +-18 V symmetrical\nMono-bridged tied load (full-bridge) or stereo single-ended (half-bridge) application\nApplication without heat sink using thermally enhanced small outline package\nHigh efficiency and low-power dissipation\nThermally p;

恩XP

音频放大器和前置放大器

恩XP

VOICE-COIL MOTOR DRIVER

VOICE-COIL MOTOR DRIVER Providing control and drive of the voice-coil motor used for head positioning in 5 V disk drive applications, the second-generation A8932CLWA is a full-bridge driver that can be configured so that its output current is a direct function of an externally applied control vol

文件：164.86 Kbytes 页数：8 Pages

ALLEGRO

VOICE-COIL MOTOR DRIVER

VOICE-COIL MOTOR DRIVER Providing control and drive of the voice-coil motor used for head positioning in 5 V disk drive applications, the second-generation A8932CLWA is a full-bridge driver that can be configured so that its output current is a direct function of an externally applied control vol

文件：164.86 Kbytes 页数：8 Pages

ALLEGRO

DRV8932 Quad Half-Bridge Driver With Integrated Current Sense

文件：2.66629 Mbytes 页数：40 Pages

TI

德州仪器