TDA8922CJ中文资料恩XP数据手册PDF规格书

General description

The TDA8922C is a high-efficiency Class D audio power amplifier. Typical output power is 2×75 W with a speaker load impedance of 6Ω. The TDA8922C is available in both HSOP24 and DBS23P power packages. The amplifier operates over a wide supply voltage range from±12.5 V to±32.5 V and features low quiescent current consumption.

Features

Pin compatible with TDA8950/20C for both HSOP24 and DBS23P packages

Symmetrical operating supply voltage range from±12.5 V to±32.5 V

Stereo full differential inputs, can be used as stereo Single-Ended (SE) or mono Bridge-Tied Load (BTL) amplifier

High output power in typical applications:

SE 2×75 W, RL=6Ω(VDD=30V; VSS=−30 V)

SE 2×60 W, RL=8Ω(VDD=30V; VSS=−30 V)

BTL 1×155 W, RL=8Ω(VDD=25V; VSS=−25 V)

Low noise

Smooth pop noise-free start-up and switch off

Zero dead time switching

Fixed frequency

Internal or external clock

High efficiency

Low quiescent current

Advanced protection strategy: voltage protection and output current limiting

Thermal FoldBack (TFB)

Fixed gain of 30 dB in SE and 36 dB in BTL applications

Fully short-circuit proof across load

BD modulation in BTL configuration