2 쨈 110 W class-D power amplifier

文件：242.21 Kbytes 页数：39 Pages

恩XP

2 쨈 110 W class-D power amplifier

文件：242.21 Kbytes 页数：39 Pages

恩XP

2 x 50 W class-D power amplifier

文件：129.37 Kbytes 页数：16 Pages

PHI

飞利浦

2 x 50 W class-D power amplifier

文件：129.37 Kbytes 页数：16 Pages

PHI

飞利浦

2 x 100 W class-D power amplifier

Overview The TDA8920B is a high efficiency class-D audio power amplifier with very low dissipation. The typical output power is 2 x 100 W.\nThe device is available in the HSOP24 power package and in the DBS23P through-hole power package. The amplifier operates over a wide supply voltage range from + Zero dead time switching\nAdvanced current protection: output current limiting\nSmooth start-up: no pop noise due to DC offset\nHigh efficiency\nOperating supply voltage from +-12.5 V to +-30 V\nLow quiescent current\nUsable as a stereo Single-Ended (SE) amplifier or as a mono amplifier in Bridge-Ti;

恩XP

恩智浦

2 x 100 W class-D power amplifier

Overview The TDA8920B is a high efficiency class-D audio power amplifier with very low dissipation. The typical output power is 2 x 100 W.\nThe device is available in the HSOP24 power package and in the DBS23P through-hole power package. The amplifier operates over a wide supply voltage range from + Zero dead time switching\nAdvanced current protection: output current limiting\nSmooth start-up: no pop noise due to DC offset\nHigh efficiency\nOperating supply voltage from +-12.5 V to +-30 V\nLow quiescent current\nUsable as a stereo Single-Ended (SE) amplifier or as a mono amplifier in Bridge-Ti;

恩XP

恩智浦

2 x 110 W class-D power amplifer

The TDA8920C is a high-efficiency class-D audio power amplifier. The typical output power is 2 x 110 W with a speaker load impedance of 4 Ω.\nThe TDA8920C is available in both HSOP24 and DBS23P power packages. The amplifier operates over a wide supply voltage range from +-12.5 V to +-32.5 V and feat Pin compatible with TDA8950/20B for both HSOP24 and DBS23P packages\nSymmetrical operating supply voltage range from +-12.5 V to +-32.5 V\nStereo full differential inputs, can be used as stereo Single-Ended (SE) or mono Bridge-Tied Load (BTL) amplifier\nHigh output power in typical applications: SE ;

恩XP

恩智浦