1 W BTL audio amplifier

文件：190.66 Kbytes 页数：20 Pages

PHI

飞利浦

1W BTL AUDIO AMPLIFIER

The UTC TDA8541(T) is a 1W BTL audio amplifier ,which hasa complementary PNP-NPN output stage and standby/mute logic,it uses UTC’s advanced technology to provide customers with lowsaturation voltage of output stage, low standby current and highSVRR, etc. Low saturation voltage of output stage External resistors could fix Gain Low standby current No switch-on/switch-off plops High SVRR Protected against outputs short-circuit to ground, VCC and across the load Thermal shut-down protection;

UTC

友顺

1 W BTL audio amplifier

GENERAL DESCRIPTION\nThe TDA8541(T) is a one channel audio power amplifier for an output power of 1 W with an 8 Ω load at a 5 V supply. The circuit contains a BTL amplifier with a complementary PNP-NPN output stage and standby/mute logic. The TDA8541T comes in an 8 pin SO package and the TDA8541 in • Flexibility in use\n• Few external components\n• Low saturation voltage of output stage\n• Gain can be fixed with external resistors\n• Standby mode controlled by CMOS compatible levels\n• Low standby current\n• No switch-on/switch-off plops\n• High supply voltage ripple rejection\n• Protected aga;

恩XP

恩智浦

1 W BTL audio amplifier

文件：194.09 Kbytes 页数：18 Pages

PHI

飞利浦

1 W BTL audio amplifier

文件：190.66 Kbytes 页数：20 Pages

PHI

飞利浦

音频放大器和前置放大器

恩XP

恩智浦