TDA7391PD中文资料差分输入单路BTL输出功率放大器，支持待机和片段检测数据手册ST规格书

描述 Description

The TDA7391PD is a bridge class AB audio power amplifier specially intended for car radio high power applications.

The high power capability together with the possibility to operate either in differential input mode or single ended input mode makes it suitable for boosters and high end car radio equipment. The exclusive fully complementary output stage and the internal fixed gain configuration drop the external component count.

The on board clipping detector allows easy implementation of gain compression systems.

特性 Features

• High power capability:
•40 W/3.2 Ω EIAJ
•32 W/3.2 Ω @ VS= 14.4 V, f = 1 kHz,d = 10 %
•26 W/4 Ω @ VS= 14.4 V, f = 1 kHz,d = 10 %
• Differential inputs (either single ended or differential input signal are accepted)
• Minimum external component count:
•No bootstrap capacitors
•No Boucherot cells
•Internally fixed gain (30 dB)
•No SVR capacitor
• Standby function (CMOS compatible)
• Programmable turn-on/off delay
• No audible pop during mute and stand-by operations
• Protections
•Short circuit (to GND, to VS, across the load)
•Very inductive loads
•Chip over temperature
•Load dump
•Open GND
•ESD