TDA19997HL中文资料恩XP数据手册PDF规格书

1. General description

The High-Definition Multimedia Interface (HDMI) switch enables connection of multiple

DVI/HDMI inputs to a receiver with at least one input. The TDA19997HL is a switch with

four HDMI 1.4 compliant DVI/HDMI inputs and one DVI/HDMI output. Each HDMI input

has its own dedicated embedded EDID memory. A fifth DDC-bus input is available for

VGA or second HDMI input of SoC. The built-in auto-adaptive equalizer improves signal

quality, allowing the use of cable lengths up to 30 m.

The TDA19997HL supports Deep Color mode in 10-bit and 12-bit per channel up to

1920 × 1080p at 50/60 Hz. The TDA19997HL supports DVI/HDMI streams with or without

High-bandwidth Digital Content Protection (HDCP 1.3) and all Data Island packets.

The TDA19997HL settings are controllable via the I2C-bus.

2. Features

Complies with the HDMI 1.4, DVI 1.0, EIA/CEA-861D and HDCP 1.3 standards

Four independent DVI/HDMI inputs, up to 2.25 gigasamples per second

Pin compatible with TDA9996/TDA9995

Robust auto-adaptive equalizer (up to 20 m AWG26 at 2.25 Gbit/s)

Robust auto-adaptive equalizer (up to 30 m AWG24 at 1.5 Gbit/s)

Integrated 50 Ω single-ended termination resistors

+5 V signal detection for each HDMI input

Supports color depth processing at 24-bit, 30-bit or 36-bit per pixel

Supports all Data Island packets

Activity detection on each input, manages output activity and power consumption

Extended mode: re-generate output TMDS waveform removing jitter and skew

Frequency measurement allowing direct reading of format/resolution

Automatic mode for main features:

Automatic Hot Plug Detect (HPD) generation and termination resistors

management

Automatic HPD generation with programmable duration

Automatic EDID load

Display Data Channel (DDC) bus:

5 V tolerant, DDC-bus inputs with bit rates up to 400 kbit/s

One DDC-bus output with the same latency as the HDMI stream pipeline delay

DDC-bus master switch functionality avoids bus corruption

DDC-bus level-shifting buffer with digital lock-up protection

A fifth DDC-bus input available for VGA or second HDMI input of SoC

I2C-bus controllable at bit rates up to 400 kbit/s

Non-volatile memory for switch management (Hot Plug Detect, Power-down)

Non-volatile storage for EDID’s allowing easy loading

Embedded Extended Display Identification Data (EDID) memory:

253-byte shared and 3-byte of dedicated EDID memory per HDMI input

Non-volatile memory for programming default EDID content

Supports sources without +5 V

5 embedded EDID memory supplied by +5 V from HDMI source

An extra 128-byte blocks for DVI or PC formats

EDID update by I2C-bus, example for AVR applications

Fail-safe output in Idle mode

Mute pin preventing from pop noise/image noise

ATC/Rx compliant for 36-bit Deep Color 1080p 60 Hz

ATC/Tx eye diagram compliant for 36-bit Deep color 1080p 60 Hz

Programmable slave address for easy cascade approach

Ready for HDMI Audio return Channel (HDMI 1.4 features refer to AN907)

3.3 V and 1.8 V power supplies

Additional ESD protection pin for CEC line

ESD protection:

HBM: class 2

MM: class B

FCDM: class IV

IEC 61000-4-2 class 3 for HDMI inputs

Power-down mode with dedicated pin

CMOS process

Lead (Pb) free LQFP100 14 × 14 × 1 mm package, pitch 0.5 mm

3. Applications

HDTV (plasma, Rear projection TV and LCD TV)

YCbCr or RGB Hi-Speed video digitizer

Projector

Home theater

AVR

Switch box