2 x 22 W BTL stereo car radio power amplifier with loudspeaker protection

GENERAL DESCRIPTION The TDA1553Q is an integrated class-B output amplifier in a 13-lead singe-in-line (SIL) plastic power package. The circuit contains 2 x 22 W amplifiers in Bridge Tied Load (BTL) configuration. The device is primarily developed for car radio applications. Features • R

文件：89.85 Kbytes 页数：10 Pages

PHI

PHI

2 x 22 W stereo BTL car radio power amplifier with loudspeaker protection and 3-state mode switch

GENERAL DESCRIPTION The TDA1553CQ is a monolithic integrated class-B output amplifier in a 13-lead plastic DIL-bent-SIL power package. It contains 2×22 W amplifiers in BTL configuration. The device is primarily developed for car radio applications. FEATURES • Few peripheral components

文件：62.34 Kbytes 页数：10 Pages

PHI

PHI

2×22 W stereo BTL car radio power amplifier with loudspeaker protection and 3-state mode switch

GENERAL DESCRIPTION\nThe TDA1553CQ is a monolithic integrated class-B output amplifier in a 13-lead plastic DIL-bent-SIL power package. It contains 2×22 W amplifiers in BTL configuration. The device is primarily developed for car radio applications.FEATURES\n• Few peripheral components\n• High outpu • Few peripheral components\n• High output power\n• Low output offset voltage\n• Fixed gain\n• Loudspeaker protection\n• Good ripple rejection\n• 3-state mode switch (operating, mute, standby)\n• Load dump protection\n• AC and DC short-circuit safe to ground and to VP\n• Thermally protected\n• Rever;

恩XP

2 x 22 W stereo BTL car radio power amplifier with loudspeaker protection and 3-state mode switch

GENERAL DESCRIPTION The TDA1553CQ is a monolithic integrated class-B output amplifier in a 13-lead plastic DIL-bent-SIL power package. It contains 2×22 W amplifiers in BTL configuration. The device is primarily developed for car radio applications. FEATURES • Few peripheral components

文件：62.34 Kbytes 页数：10 Pages

PHI

PHI

2 x 22 W BTL stereo car radio power amplifier with loudspeaker protection

GENERAL DESCRIPTION The TDA1553Q is an integrated class-B output amplifier in a 13-lead singe-in-line (SIL) plastic power package. The circuit contains 2 x 22 W amplifiers in Bridge Tied Load (BTL) configuration. The device is primarily developed for car radio applications. Features • R

文件：89.85 Kbytes 页数：10 Pages

PHI

PHI

2 x 22 W BTL stereo car radio power amplifier with loudspeaker protection

GENERAL DESCRIPTION\nThe TDA1553Q is an integrated class-B output amplifier in a 13-lead singe-in-line (SIL) plastic power package. The circuit contains 2 x 22 W amplifiers in Bridge Tied Load (BTL) configuration. The device is primarily developed for car radio applications. • Requires very few external components\n• High output power\n• Low offset voltage at outputs\n• Fixed gain\n• Good ripple rejection\n• Mute/stand-by switch\n• Load dump protection\n• AC and DC short-circuit-safe to ground and VP\n• Loudspeaker protection (LSP)\n• Thermally protected\n• Reverse pola;

恩XP