22 W BTL or 2 x 11 W stereo power amplifier

文件：1.21488 Mbytes 页数：22 Pages

恩XP

No switch-on/switch-off pops

文件：386.04 Kbytes 页数：8 Pages

UTC

友顺

22 W BTL or 2 x 11 W stereo power amplifier

文件：1.21488 Mbytes 页数：22 Pages

恩XP

22 W BTL or 2 x 11 W stereo power amplifier

文件：1.21488 Mbytes 页数：22 Pages

恩XP

22 W BTL or 2 x 11 W stereo power amplifier

文件：1.21488 Mbytes 页数：22 Pages

恩XP

12W BTL OR 2×6W STEREO CAR RADIO POWER AMPLIFIER

The UTC TDA1519B is an integrated class - B dual outputamplifier. It contains two identical amplifiers with differential inputstages. The gain of each amplifier is fixed at 40dB. The device isprimarily developed for car radio application. Requires very few external components for Bridge-Tied Load (BTL) operation Stereo or BTL application High output power Low stand-by current (<100μ A) Low mute/stand-by switching current Load dump protection AC and DC short-circuit safe to ground and Vp Thermally protected;

UTC

友顺

22W BTL OR 2×11W STEREO POWER AMPLIFIER

The UTC TDA1519C is an integrated class-B dual outputamplifier with gain fixed at 40dB. It’s packed in a 9-lead plastic single in-line power package for Low thermal resistance and high heat dissipation. · Two identical amplifiers with Identical differential input stages suitable for Stereo or BTL application. \n· Load dump, reverse polarity , short-circuit and over temperature protections \n· Fixed gain at 40dB with Good ripple rejection \n· Mute/standby switch with low switching current \n· Requir;

UTC

友顺