TDA1305T中文资料飞利浦数据手册PDF规格书

GENERAL DESCRIPTION

The TDA1305T is a new generation of filter-DAC which features a unique combination of bitstream and continuous calibration techniques. The converter functions as a bitstream converter for low signals while large signals are generated using the dynamic continuous calibration technique, thus resulting in low power consumption, small chip size and easy application.

FEATURES

• Easy application

• 16fs Finite-duration Impulse-Response (FIR) filter incorporated

• Selectable system clock (fsys) 256fsor 384fs

• I2S-bus serial input format (at fsys= 256fs) or LSB fixed 16, 18 or 20 bits serial input mode (at fsys= 384fs)

• Slave-mode clock system

• Cascaded 4-stage digital filter incorporating 2-stage FIR filter, linear interpolator and sample-and-hold

• Smoothed transitions before and after muting (soft mute)

• Digital de-emphasis filter for three sampling rates of 32 kHz, 44.1 kHz and 48 kHz

• 12 dB attenuation via the attenuation input control

• Double speed mode

• 2nd order noise shaper

• 96 (fsys= 384fs) or 128 (fsys= 256fs) times oversampling in normal speed mode

• 48 (fsys= 384fs) or 64 (fsys= 256fs) times oversampling in double speed mode

• Bitstream continuous calibration concept

• Small outline SO28 package

• Voltage output 1.5 V (RMS) at line drive level

• Low total harmonic distortion

• No zero crossing distortion

• Inherently monotonic

• No analog post filtering required

• Superior signal-to-noise ratio

• Wide dynamic range (18-bit)

• Single rail supply (3.4 to 5.5 V).