Stereo continuous calibration DAC CC-DAC

GENERAL DESCRIPTION The TDA1312A; 1312AT is a voltage driven D/A converter and is a device of a new generation of digital-to-analog converters which embodies the innovative technique of Continuous Calibration (CC). The largest bit-currents are repeatedly generated by one single current reference

文件：61.84 Kbytes 页数：13 Pages

PHI

PHI

Stereo continuous calibration DAC CC-DAC

GENERAL DESCRIPTION The TDA1312A; 1312AT is a voltage driven D/A converter and is a device of a new generation of digital-to-analog converters which embodies the innovative technique of Continuous Calibration (CC). The largest bit-currents are repeatedly generated by one single current reference

文件：61.84 Kbytes 页数：13 Pages

PHI

PHI

Stereo continuous calibration DAC CC-DAC

GENERAL DESCRIPTION The TDA1313; 1313T is a voltage driven digital-to-analog converter, and is of a new generation of DACs which incorporates the innovative technique of Continuous Calibration (CC). The largest bit-currents are repeatedly generated from one single current reference source. This d

文件：76.88 Kbytes 页数：15 Pages

PHI

PHI

Stereo continuous calibration DAC CC-DAC

GENERAL DESCRIPTION The TDA1313; 1313T is a voltage driven digital-to-analog converter, and is of a new generation of DACs which incorporates the innovative technique of Continuous Calibration (CC). The largest bit-currents are repeatedly generated from one single current reference source. This d

文件：76.88 Kbytes 页数：15 Pages

PHI

PHI

Quadruple filter DAC

GENERAL DESCRIPTION The TDA1314T is a quadruple very low noise high dynamic range DAC which is intended for use in motor cars and is controlled by the car radio DSP. Each channel incorporates an 8th-order IIR up-sampling filter from 1ASF to 4ASF followed by a 1st-order noise shaper and DAC. The D

文件：139.4 Kbytes 页数：15 Pages

PHI

PHI

Quadruple filter DAC

GENERAL DESCRIPTION The TDA1314T is a quadruple very low noise high dynamic range DAC which is intended for use in motor cars and is controlled by the car radio DSP. Each channel incorporates an 8th-order IIR up-sampling filter from 1ASF to 4ASF followed by a 1st-order noise shaper and DAC. The D

文件：139.4 Kbytes 页数：15 Pages

PHI

PHI

Digital audio input/output circuit DAIO

GENERAL DESCRIPTION The Digital Audio Input/Output circuit (DAIO) of the TDA1315H is a complete transceiver for biphase-mark encoded digital audio signals that conform to the SPDIF and“IEC 958”interface standards (consumer mode), made in the full CMOS-process C200. FEATURES • Tran

文件：411.86 Kbytes 页数：36 Pages

PHI

PHI

Digital audio input/output circuit DAIO

GENERAL DESCRIPTION The Digital Audio Input/Output circuit (DAIO) of the TDA1315H is a complete transceiver for biphase-mark encoded digital audio signals that conform to the SPDIF and“IEC 958”interface standards (consumer mode), made in the full CMOS-process C200. FEATURES • Tran

文件：411.86 Kbytes 页数：36 Pages

PHI

PHI

General Digital Input GDIN

GENERAL DESCRIPTION The TDA1373H is a General Digital Input (GDIN) device for audio signals which is able to perform a high-quality sample rate conversion of digital audio signals (SRC mode). The device reads several serial input formats and signals in the IEC 958 digital audio format (also known

文件：308.04 Kbytes 页数：40 Pages

PHI

PHI

Noise shaping filter DAC

GENERAL DESCRIPTION The TDA1386T is a dual CMOS digital-to-analog converter with up-sampling filter and noise shaper. The combination of oversampling up to 4fs, noise shaping and continuous calibration conversion ensures that only simple 1st order analog post filtering is required. The TDA1386T

文件：167.34 Kbytes 页数：24 Pages

PHI

PHI