TCSH2A工业自动化与控制的监控器-继电器输出规格书PDF中文资料

TCSH2A属于工业自动化与控制的监控器-继电器输出。由力特公司制造生产的TCSH2A监控器 - 继电器输出继电器输出监控器检测工业继电器的异常输出，并触发逻辑输出或触头组。常见的检测类型包括：AC 和 DC 电流或电压、电压不对称、接地故障、温度监控、缺相，以及相位序列或不平衡。这些器件可根据跳闸范围、延迟时间、供电电压、安装类型和开关电路进行选择。

描述 Description

The TCS Series is a low cost method of go/no go current

detection. It includes a solid-state output to sink or source

current when connected directly to a standard PLC digital input

module. Its normally open or normally closed output can also be

used to control relays, lamps, valves, and small heaters rated up

to 1A steady, 10A inrush. The TCS is self-powered (no external

power required to operate the unit) and available with an

adjustable actuation range of 2 - 20A or factory fixed actuation

points from 2 - 45A.

Operation

Normally Open: When a current equal to or greater than the

actuate current is passed through the toroidal sensor, the output

closes. When the current is reduced to 95 of the actuate

current or less, the output opens.

Normally Closed: When the current through the toroid is equal

to or greater than the actuate current, the output opens. When

the current is reduced below 95 of the actuate current, the

output closes. To increase sensitivity, multiple turns may be

made through the TCS’s toroidal sensor. The trip point range is

divided by the number of turns through the toroidal sensor to

create a new range. When using an external CT, select a 2VA,

0-20A output CT rated for the current to be monitored. Select

TCS adjustment range 0. Pass one secondary wire lead through

the TCS’ toroid and connect the secondary leads together.

FEATURES BENEFITS

Self powered No control voltage is required to operate the unit

Totally solid state

and encapsulated

No moving parts to arc and wear out over time and

encapsulated to protect against shock, vibration,

and humidity

Can connect directly

to PLC

Solid state output to sink or source current can

be connected directly to a standard PLC digital

input module

1A steady, 10A inrush

solid-state output Provides 100 million operations in typical conditions

Complete isolation

between sensed current

and control circuit

Allows you to monitor a load in a separate

lectrical system