TCM1050中文资料双路瞬态电压抑制器数据手册TI规格书

描述 Description

The TCM1030 and TCM1050 dual transient-voltage suppressors are designed specifically for telephone line card protection against lightning and transients (voltage transients) induced by ac lines.One of the TIP terminals (pin 1 or 8) and one of the RING terminals (pin 4 or 5) are connected to the tip and ring circuits of a SLIC (subscriber-line interface circuit). The battery feed connections between the SLIC and the subscriber line arefrom the remaining TIP (pin1 or 8) and RING (pin 4 or 5) through the TCM1030 or the TCM1050 to the tip andring lines. Transients are suppressed between tip and ground, and ring and ground. Positive transients are clamped by diodes D1 and D2. Negative transients that are more negative than VS causethe SCRs, Q1 and Q2, to crowbar. The high holding current of the SCRs prevent dc latchup as the transientsubsides. The TCM1030 and TCM1050 are characterized for operation from -40°C to 85°C.

特性 Features

·Meet or Exceed Bell Standard LSSGR Requirements ·Externally-Controlled Negative Firing Voltage...-90 V Max ·Accurately Controlled, Wide Negative Firing Voltage Range...-5 V to -85 V ·Positive Surge Current (see Note 1): TCM1030 TCM1050 10/1000 16 A 30 A 10/160 25 A 45 A 2/10 35 A 50 A ·Negative Surge Current (see Note 1): TCM1030 TCM1050 10/1000 -16 A -25 A 10/160 -25 A -29 A 2/10 -35 A -36 A ·High Holding Current ·TCM1030...100 mA Min ·TCM1050...150 mA Min

NOTE 1:The notation 10/1000 refers to a waveshape having tr = 10 us and tw = 1000 us ending at 50% of the peak value. The notation 10/160 is tr = 10 us and tw = 160 us. The notation 2/10 is tr = 2 us and tw = 10 us.