TCAN337GD集成电路（IC）的驱动器接收器收发器规格书PDF中文资料

TCAN337GD属于集成电路（IC）的驱动器接收器收发器。由德州仪器制造生产的TCAN337GD驱动器，接收器，收发器该系列产品的主要功能是提供必需的硬件资源，以通过延长电缆或印制线进行通信。确切的功能会因所采用的通信协议而异，可能包括诸如瞬态抑制之类的功能，这些功能对于通信用途可能并非绝对必要，但对于可能的使用环境却是明智之选。

1 Features

. 3.3V Single supply operation

. Data rates up to 5Mbps (TCAN33xG devices)

. Compatible with ISO 11898-2

. SOIC-8 and SOT-23 package options

. Operating Modes:

. Normal mode (all devices)

. Low power standby mode with wake

(TCAN334)

. Silent mode (TCAN330, TCAN337)

. Shutdown mode (TCAN330, TCAN334)

. Wide common mode range of operation ±12V

. Bus pin fault protection of ±14V

. Total loop delay < 135ns

. Wide ambient operation temperature range: .40°C

to 125°C

. Optimized behavior when unpowered:

. Bus and logic pins are high impedance (no load

to operating bus or application)

. Power up / down glitch free operation

. Excellent EMC performance

. Protection features:

. ESD Protection of bus terminals

. HBM ESD Protection exceeds ±25kV

. IEC61000-4-2 ESD Contact discharge

protection exceeds ±12kV

. Driver dominant time out (TXD DTO)

. Receiver dominant time out (RXD DTO)

. Fault output pin (TCAN337 only)

. Undervoltage protection on VCC

. Thermal shutdown protection

. Current limiting on bus pins

2 Applications

. 5-Mbps operation in CAN with flexible data rate

networks (TCAN33xG devices)

. 1-Mbps operation in highly loaded can networks

. Industrial automation, control, sensors and drive

systems

. Building, security and climate control automation

. Telecom base station status and control

. CAN Bus standards such as CANopen,

DeviceNet, NMEA2000, ARINC825, ISO11783,

CANaerospace

3 Description

The TCAN33x family of devices is compatible

with the ISO 11898 High Speed CAN (Controller

Area Network) Physical Layer standard. TCAN330,

TCAN332, TCAN334 and TCAN337 are specified

for data rates up to 1Mbps. Pending the

release of the updated version of ISO 11898-2

including CAN FD, additional timing parameters

defining loop delay symmetry are specified for

the TCAN330G, TCAN332G, TCAN334G and

TCAN337G devices. The devices include many

protection features including driver and receiver

Dominant Time Out (DTO) providing CAN network

robustness. Integrated 12kV IEC-61000-4-2 ESD

Contact Discharge protection eliminates the need of

additional components for system level robustness.

The use of single 3.3V supply enables the

transceivers to directly interface with 3.3V CAN

controllers/MCUs. In addition, these devices are fully

compatible with other 5V CAN transceivers on the

same bus.

These devices have excellent EMC performance

due to matched Dominant and Recessive Common

Modes. Ultra low power Shutdown and Standby

modes make these devices attractive for battery

powered applications.

This family of devices is available in standard 8-pin

SOIC packages for drop-in compatibility and in small

SOT-23 packages for space-constrained applications.