TCAN245x-Q1 Automotive Signal Improvement Capable CAN FD System Basis Chip (SBC) with Integrated Buck Regulator and Watchdog

1 Features • AEC-Q100 qualified for automotive applications • Meets the requirements of ISO 11898-2:2024 for CAN-FD and CAN-FD Signal Improvement Capability (SIC) • Integrated 3.3V or 5V Buck regulator (VCC1) with 1 A output capability – Pin-selectable output (3.3V or 5V) based on VSEL pin

文件：884.53 Kbytes 页数：13 Pages

TI

德州仪器

TCAN245x-Q1 Automotive Signal Improvement Capable CAN FD System Basis Chip (SBC) with Integrated Buck Regulator and Watchdog

1 Features • AEC-Q100 qualified for automotive applications • Meets the requirements of ISO 11898-2:2024 for CAN-FD and CAN-FD Signal Improvement Capability (SIC) • Integrated 3.3V or 5V Buck regulator (VCC1) with 1 A output capability – Pin-selectable output (3.3V or 5V) based on VSEL pin

文件：888.26 Kbytes 页数：14 Pages

TI

德州仪器

TCAN245x-Q1 Automotive Signal Improvement Capable CAN FD System Basis Chip (SBC) with Integrated Buck Regulator and Watchdog

1 Features • AEC-Q100 qualified for automotive applications • Meets the requirements of ISO 11898-2:2024 for CAN-FD and CAN-FD Signal Improvement Capability (SIC) • Integrated 3.3V or 5V Buck regulator (VCC1) with 1 A output capability – Pin-selectable output (3.3V or 5V) based on VSEL pin

文件：852.63 Kbytes 页数：13 Pages

TI

德州仪器

TCAN245x-Q1 Automotive Signal Improvement Capable CAN FD System Basis Chip (SBC) with Integrated Buck Regulator and Watchdog

1 Features . AEC-Q100 qualified for automotive applications . Meets the requirements of ISO 11898-2:2024 for CAN-FD and CAN-FD Signal Improvement Capability (SIC) . Integrated 3.3V or 5V Buck regulator (VCC1) with 1A output capability . Pin-selectable output (3.3V or 5V) based on VSEL pin

文件：1.41088 Mbytes 页数：15 Pages

TI

德州仪器

具有降压稳压器的汽车级 CAN FD 信号改善 (SIC) 系统基础芯片 (SBC)

TCAN245x-Q1 是一系列系统基础芯片 (SBC)，内置了支持控制局域网灵活数据速率 (CAN FD) 并满足 ISO-11898:2-2024 物理层要求（包括 SIC 规范）的收发器。该 CAN FD 收发器支持高达 8Mbps 的数据速率。TCAN245x-Q1 集成了一个可输出 3.3V 或 5V 并提供高达 1A 输出电流的降压稳压器 (VCC1)。降压稳压器集成了展频调制功能，可改善 EMC 性能。VCC2 LDO 为高达 200mA 的负载提供 5V 输出。TCAN2451-Q1 通过识别选择性唤醒帧 (WUF) 来支持局部联网\n\nTCAN245x-Q1 具有 LIMP 符合面向汽车应用的 AEC-Q100 标准\n \n满足 ISO 11898-2:2024 关于 CAN-FD 和 CAN-FD 信号改善功能 (SIC) 的要求\n \n集成具有 1A 输出能力的 3.3V 或 5V 降压稳压器 (VCC1) \n \n提供基于 VSEL 引脚连接的引脚可选输出（3.3V 或 5V）\n \n1.8MHz 到 2.4MHz 的开关频率选项可实现更小的板载电感器\n \n集成展频调制可改善 EMC 性能\n \n\n \n5V LDO 稳压器 (VCC2) 最高支持 200mA，并具有非板载功能和电池短路保护\n \n多种从睡眠模式唤醒的方法 \n \nCAN;

TI

德州仪器

TCAN245x-Q1 Automotive Signal Improvement Capable CAN FD System Basis Chip (SBC) with Integrated Buck Regulator and Watchdog

1 Features • AEC-Q100 qualified for automotive applications • Meets the requirements of ISO 11898-2:2024 for CAN-FD and CAN-FD Signal Improvement Capability (SIC) • Integrated 3.3V or 5V Buck regulator (VCC1) with 1 A output capability – Pin-selectable output (3.3V or 5V) based on VSEL pin

文件：888.26 Kbytes 页数：14 Pages

TI

德州仪器