TCAN1463-Q1 Automotive Signal Improvement Capable CAN FD Transceiver With Sleep Mode

1 Features • AEC-Q100 (grade 1) qualified for automotive applications • Functional Safety-Capable – Documentation available to aid in functional safety system design • Meets the requirements of ISO 11898-2:2016 • Implements Signal Improvement Capability (SIC) as defined in CiA 601-4 – Act

文件：2.24339 Mbytes 页数：55 Pages

TI

德州仪器

TCAN1463-Q1 Automotive Signal Improvement Capable CAN FD Transceiver With Sleep Mode

1 Features • AEC-Q100 (grade 1) qualified for automotive applications • Functional Safety-Capable – Documentation available to aid in functional safety system design • Meets the requirements of ISO 11898-2:2016 • Implements Signal Improvement Capability (SIC) as defined in CiA 601-4 – Act

文件：2.61403 Mbytes 页数：55 Pages

TI

德州仪器

TCAN1463-Q1 Automotive Signal Improvement Capable CAN FD Transceiver With Sleep Mode

1 Features • AEC-Q100 (grade 1) qualified for automotive applications • Functional Safety-Capable – Documentation available to aid in functional safety system design • Meets the requirements of ISO 11898-2:2016 • Implements Signal Improvement Capability (SIC) as defined in CiA 601-4 – Act

文件：2.44896 Mbytes 页数：55 Pages

TI

德州仪器

TCAN1463-Q1 Low-Power Signal Improvement CAN FD Transceiver with INH and WAKE

文件：1.40782 Mbytes 页数：12 Pages

TI

德州仪器

具有 INH 和 WAKE 引脚的低功耗信号改进 CAN FD 收发器

TCAN1463-Q1 是高速控制器区域网 (CAN) 收发器，满足 ISO 11898-2:2016 高速 CAN 规范的物理层要求和 CiA 601-4 信号改善 (SIC) 规范。该器件支持传统 CAN 和 CAN FD（数据速率高达 8Mbps）。\n\nCAN SIC 实施可减少网络中的信号振铃，在更大的复杂拓扑中支持可靠的 CAN FD 通信。该器件提供增强的位时序对称，在节点数量较多时和存根拓扑中，可实现 5Mbps 下的 CAN FD 通信。8Mbps 时也支持 CAN FD 运行。该器件的引脚与传统 CAN FD 收发器（例如 TCAN1043A-Q1 或 TCAN1043- • 符合面向汽车应用的 AEC Q100 标准\n• 实现信号改善功能 (SIC)，在 CiA 601-4 中定义 \n• 向后兼容，可用于传统 CAN 网络\n• 支持高达 8Mbps 的 CAN FD 数据速率\n• VIO 电平转换支持 1.8V、2.5V、3.3V 和 5V MCU\n• 正常模式\n• 低功耗待机模式\n• 可预测未上电时的行为 \n• 在 CAN 总线和 RXD 终端上实现上电/断电无干扰运行\n• 保护特性：±58V 总线容错、42V 负载突降支持、IEC ESD 保护、热关断保护、TXD 显性状态超时、电源端子上的欠压保护\n• 采用 SOT (14) 封装、S;

TI

德州仪器

TCAN1463-Q1 Automotive Signal Improvement Capable CAN FD Transceiver With Sleep Mode

1 Features • AEC-Q100 (grade 1) qualified for automotive applications • Functional Safety-Capable – Documentation available to aid in functional safety system design • Meets the requirements of ISO 11898-2:2016 • Implements Signal Improvement Capability (SIC) as defined in CiA 601-4 – Act

文件：2.61403 Mbytes 页数：55 Pages

TI

德州仪器

TCAN1463-Q1 Automotive Signal Improvement Capable CAN FD Transceiver With Sleep Mode

1 Features • AEC-Q100 (grade 1) qualified for automotive applications • Functional Safety-Capable – Documentation available to aid in functional safety system design • Meets the requirements of ISO 11898-2:2016 • Implements Signal Improvement Capability (SIC) as defined in CiA 601-4 – Act

文件：2.24339 Mbytes 页数：55 Pages

TI

德州仪器

TCAN1463-Q1 Automotive Signal Improvement Capable CAN FD Transceiver With Sleep Mode

1 Features • AEC-Q100 (grade 1) qualified for automotive applications • Functional Safety-Capable – Documentation available to aid in functional safety system design • Meets the requirements of ISO 11898-2:2016 • Implements Signal Improvement Capability (SIC) as defined in CiA 601-4 – Act

文件：2.44896 Mbytes 页数：55 Pages

TI

德州仪器