TCAN1144-Q1

具有看门狗、LIMP 和总线诊断功能的汽车类增强型 CAN FD 和高速 CAN 收发器; • AEC-Q100 (Grade 1): Qualified for automotive applications \n• Meets the requirements of ISO 11898-2:2016\n• TCAN1145-Q1 and TCAN1146-Q1 provide support for selective wake/partial networking while transmitting/receiving error-free Classic CAN or CAN FD data.\n• CAN FD communication rates up to 5 Mbps\n• Functional Safety Quality-Managed (TCAN1144-Q1 and TCAN1146-Q1) \n• Documentation available to aid in functional safety system design \n \n• Functional Safety-Capable (TCAN1145-Q1) \n• Documentation available to aid in functional safety system design\n \n• The TCAN114x-Q1 supports nominal processor IO voltages from 1.8 V to 5 V\n• Wide operating range: \n• ±58-V Bus fault protection\n• ±12-V Common mode\n \n• TCAN1144-Q1 and TCAN1146-Q1 support: \n• Watchdog: Timeout, window and Q&A\n• Advanced bus fault diagnostics and reporting \n• Programmable INH/LIMP pin\n \n• 14-Pin SOIC, VSON and SOT23 packages \n• VSON package with improved automated optical inspection (AOI) capability;

The TCAN114x-Q1 is a family of enhanced high-speed, CAN FD transceivers supporting data rates up to 5 Mbps. The devices are configured using serial peripheral interface (SPI) for access to full functionality. The TCAN114x-Q1 supports nominal processor IO voltages from 1.8 V to 5 V by applying the appropriate voltage to the VIO pin, allowing lower power processors to be used.\n\nThe TCAN1145-Q1 and TCAN1146-Q1 transceivers support selective wake (being able to wake-up based on WUF identification). This feature enables systems to implement partial networking and operate with a reduced number of nodes in an active state while the remaining nodes are in a low-power sleep mode). The transceivers and selective wake function meet the specifications of the ISO 11898-2:2016 standard.\n\nThe TCAN1144-Q1 and TCAN1146-Q1 are full featured devices supporting watchdog and advanced bus diagnostics. For ease of debug, the advanced bus fault diagnostics and communication feature can be used to determine specific bus faults. \n\nThe TCAN114x-Q1 is a family of enhanced high-speed CAN FD transceivers that are register compatible enabling system designers the flexibility to implement features needed without hardware modifications and with minimal software changes. The TCAN1144-Q1 and TCAN1146-Q1 inhibit (INH) pin can be used to either enable node power or be configured as a limp home pin when a watchdog error takes place.

TCAN1144DMTRQ1

TCAN114x-Q1 Enhanced CAN FD and High Speed CAN Transceiver with Selective Wake

TCAN1144DRQ1

TCAN114x-Q1 Enhanced CAN FD and High Speed CAN Transceiver with Selective Wake

TCAN1144DYYRQ1

TCAN114x-Q1 Enhanced CAN FD and High Speed CAN Transceiver with Selective Wake

TCAN1144-Q1

TCAN114x-Q1 Enhanced CAN FD and High Speed CAN Transceiver with Selective Wake

TCAN1144-Q1

TCAN114x-Q1 Enhanced CAN FD and High Speed CAN Transceiver with Selective Wake

TCAN1144-Q1_V01

TCAN114x-Q1 Enhanced CAN FD and High Speed CAN Transceiver with Selective Wake

TCAN1144DMTRQ1

Package：14-VDFN 裸露焊盘；包装：卷带（TR） 类别：集成电路（IC） 驱动器，接收器，收发器 描述：IC INTERFACE

TCAN1144DRQ1

Package：14-SOIC（0.154"，3.90mm 宽）；包装：管件 类别：集成电路（IC） 驱动器，接收器，收发器 描述：AUTOMOTIVE ENHANCED CAN FD AND H

TCAN1144DYYRQ1

Package：SOT-23-14 薄型，SOT-23 变体；包装：管件 类别：集成电路（IC） 驱动器，接收器，收发器 描述：AUTOMOTIVE ENHANCED CAN FD AND H