TCAN1046A-Q1中文资料德州仪器数据手册PDF规格书

1 Features

• AEC-Q100 (Grade 1): Qualified for automotive

applications

• Two independent high-speed CAN FD transceivers

with mode control

• Meets the requirements of ISO 11898-2:2016

physical layer standard

• Functional Safety-Capable

– Documentation available to aid in functional

safety system design

• Support of classical CAN and optimized CAN FD

performance at 2, 5, and 8 Mbps

– Short and symmetrical propagation delays for

enhanced timing margin

• Support for 12-V and 24-V battery applications

• Receiver common-mode input voltage: ±12 V

• Protection features:

– Bus fault protection: ±58 V

– Undervoltage protection

– TXD-dominant time-out (DTO)

• Data rates down to 9.2 kbps

– Thermal-shutdown protection (TSD)

• Operating modes:

– Normal mode

– Low power standby mode supporting remote

wake-up request

• Optimized behavior when unpowered

– Bus and logic pins are high impedance (no load

to operating bus or application)

– Hot-plug capable: power-up and power-down

glitch-free operation on bus and RXD output

• Junction temperatures from: –40°C to 150°C

• Available in SOIC (14) and leadless VSON (14)

packages (4.5 mm x 3.0 mm) with improved

automated optical inspection (AOI) capability

2 Applications

• Automotive and transportation

– Body control modules

– Automotive gateway

– Advanced driver assistance system (ADAS)

– Infotainment

3 Description

The TCAN1046A-Q1 is a dual high-speed controller

area network (CAN) transceiver that meets the

physical layer requirements of the ISO 11898-2:2016

high-speed CAN specification.

The device supports both classical CAN and CAN FD

networks up to 8 megabits per second (Mbps). The

device has two CAN FD channels with independent

supply, VCC1 and VCC2, and mode control, STB1 and

STB2 pins, allowing for true independent operation

of each CAN channel. The ability to operate each

channel independent of one another is important in

applications that require redundancy or additional

CAN FD channels to act as a back-up in the event

of a system failure.

The device includes many protection and diagnostic

features including thermal-shutdown (TSD), TXDdominant

time-out (DTO), and bus fault protection up

to ±58 V. The device has defined failsafe behavior in

supply under-voltage or floating pin scenarios.