TCAN1044AEVDRQ1集成电路（IC）的驱动器接收器收发器规格书PDF中文资料

TCAN1044AEVDRQ1属于集成电路（IC）的驱动器接收器收发器。由德州仪器制造生产的TCAN1044AEVDRQ1驱动器，接收器，收发器该系列产品的主要功能是提供必需的硬件资源，以通过延长电缆或印制线进行通信。确切的功能会因所采用的通信协议而异，可能包括诸如瞬态抑制之类的功能，这些功能对于通信用途可能并非绝对必要，但对于可能的使用环境却是明智之选。

1 Features

• AEC-Q100 (Grade 0) Qualified for automotive

applications

• Meets the requirements of ISO 11898-2:2016

physical layer standard

• Functional Safety-Capable

– Documentation available to aid in functional

safety system design

• Support of classical CAN and optimized CAN FD

performance at 2, 5, and 8 Mbps

– Short and symmetrical propagation delays for

enhanced timing margin

• I/O voltage range supports 1.7 V to 5.5 V

• Support for 12-V and 24-V battery applications

• Receiver common mode input voltage: ±12 V

• Protection features:

– Bus fault protection: ±58 V

– Undervoltage protection

– TXD-dominant time-out (DTO)

• Data rates down to 9.2 kbps

– Thermal-shutdown protection (TSD)

• Operating modes:

– Normal mode

– Low power standby mode supporting remote

wake-up request

• Optimized behavior when unpowered

– Bus and logic pins are high impedance (no load

to operating bus or application)

– Hot-plug capable: power up/down glitch-free

operation on bus and RXD output

• 8-Pin SOIC and small footprint SOT-23 package

2 Applications

• Automotive and transportation

– Body control modules

– Automotive gateway

– Advanced driver assistance system (ADAS)

– Infotainment

3 Description

The TCAN1044AEV-Q1 is a high-speed controller

area network (CAN) transceiver that meets the

physical layer requirements of the ISO 11898-2:2016

high-speed CAN specification.

The transceiver has a certified electromagnetic

compatibility (EMC) operation making it a suitable

choice for classical CAN and CAN FD networks up

to 5 megabits per second (Mbps). Up to 8 Mbps

operation in simpler networks is possible with these

devices. The device includes internal logic level

translation via the VIO pin to allow for interfacing the

transceiver I/O's directly to 1.8-V, 2.5-V, 3.3-V, or 5-

V logic levels. The transceiver supports a low-power

standby mode and wake over CAN which is compliant

to the ISO 11898-2:2016 defined wake-up pattern

(WUP).

The transceiver also includes thermal-shutdown

(TSD), TXD-dominant time-out (DTO), supply

undervoltage detection, and ±58-V bus fault

protection. The device has defined fail-safe behavior

in supply undervoltage or floating pin scenarios.